configuration and options guide - IBM Quicklinks

1. A single DIMM configuration is valid if installed in socket DIMM1. Otherwise,DIMMs must be configured in matched pairs starting with DIMM sockets 1 and 3,then 2 and 4. Single DIMM models require the standard DIMM either be matchedor removed, before adding additional memory in pairs.2. All DIMM speeds within a configuration must match. All PC3200 or all PC2700.IntelliStation M Pro 6220 Hard Disk Drive (HDD) and Optical StorageOptionsSBBNumberOptionNumberDescription Bays Supported Height MaximumQuantitySATA HDDs 1, 274P5102 09N4253 80GB 7200rpm Serial ATA 1, 3 SL 290P0581 09N4254 160GB 7200rpm Serial ATA 1, 3 SL 2IDE HDDs 1, 374P5145 22P7157 40GB 7200 rpm ATA-100 (EIDE) HDD 1, 3 SL 249P2895 09N4226 80GB 7200 rpm ATA-100 (EIDE) HDD 1, 3 SL 202R2677 09N4231 120GB 7200 rpm ATA-100 (EIDE) HDD 1, 3 SL 2Optical Drives 471P8149 10K3782 48x-20x CD-ROM Black Internal IDE Drive 2 HH 190P4239 22P7042 48x/32x/48x Max CD-RW Drive 2 HH 102R3278 22P6950 16x Max RAM-Read DVD-ROM Drive 2 HH 126K8793 73P3305 Multi-Burner Plus 2 HH 11. Standard HDD installed in bay three for both SATA and IDE models.2. SATA models support a maximum of two SATA devices and one IDE device.3. EIDE models support a maximum of three IDE devices including CD-ROM drives and HDDs.4. Standard optical drive is installed in Bay 1.14 Configuration and Options Guide