configuration and options guide - IBM Quicklinks

Refer to the Important Notices section for important notices5. xSeries 335 includes an integrated ATI Rage XL SVGA controller with 8MB of video memory.6. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).7. Includes a 17in Flat Panel Monitor.8. Includes a 15in Flat Panel Monitor.SBB Number Option Number DescriptionRack and NetBAY 1, 2Refer to the Rack Cabinets and Options section for informationconcerning IBM racks and rack-supported devices.Console Connectivity 3- 06P4792 C2T Interconnect Cable Chain Technology Cable Kit 4- 1735L04 NetBAY Local Console Manager- 1735R16 NetBAY Remote Console Manager- 32P1637 C2T Conversion Option- 09N4290 NetBAY 1x4 Console Switch- 09N4291 NetBAY 2x8 Console Switch32P8917 28L3644 Space Saver II Keyboard 6, 7Keyboard and Mouse 502R3421 28L3673 Sleek 2-button Mouse, business black1. xSeries 335 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinetsand Options section.2. Note limitations and restrictions required for adequate cooling in the Rack Cabinets and Options section. Ifnon-IBM racks are to be used, assure that both front and rear doors offer a minimum of 48% open area uniformlydistributed and in line with installed servers. A clearance of 51 to 64mm (2 to 2.5in) must be maintained betweenthe front door and the system unit's front bezel. The rear door must maintain the same or greater clearance.3. Refer to the Rack Console Options section for information regarding console connectivity using these options.4. A C2T Interconnect Cable Chain Technology Cable Kit (P/N 06P4792) may be used for the attachment of consoledevices to one or multiple chained xSeries 335s. The kit contains a 2m (6.5ft) breakout cable for attachmentto a keyboard, mouse and monitor as well as a 2m (6.5ft) chaining cable for connecting two xSeries 335s togetherwhen the standard 260mm (10in) chaining cable is not long enough. A maximum of 42 xSeries 335s are supportedin a single chain. No more than one Cable Chain Technology Cable Kit may be used. If the last server in the chainis connected to a console switch rather than directly to a monitor, a console cable (P/N 09N4293 or 94G7447) isrequired in addition to the cable kit. System management interconnect network functionality is transmitted betweenx335 systems through the C2T Interconnect cable.5. xSeries 335 supports rack configurations only and ships without a keyboard or mouse.6. Installation within a rack requires optional keyboard tray (P/N 28L4707), which stows in ready-to-use position,or NetBAY 2U Flat Panel Monitor Console Kit. Standard with 2U NetBAY console kits7. Advanced TrackPoint IV features are not available on IBM xSeries systems.Chapter 13. xSeries 335 119