configuration and options guide - IBM Quicklinks

6. Audio and video are not supported for DVD-ROM drives. These drives are for data retrieval only.7. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirmthe controller supports the desired External Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options,see the specific expansion unit section. For Fibre Channel storage devices, refer to the Fibre Channel Solutions Overview section.8. In order to attach EXP400 to the integrated controller when ServeRAID-5i or 6i+ is installed, the external SCSI interface kit is required to enablea 0.8mm VHDCI external connector on the system chassis.9. To convert an EXP Storage Unit to a tower form factor the EXP Rack-to-Tower Conversion Kit is required.10. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).Bay Form Factor Height Front Access Usage133mm (5.25in) HH 2YesOpenB 1 133mm (5.25in) 2HH Yes Open133mm (5.25in) HH Yes IDE CD-ROM89mm (3.5in) SL Yes Diskette1 ... 6 HS SL Yes OpenA 1 1. Removable media bays A and B can be converted to three hot-C 3 D 4 swap HDD bays using the optional Ultra320 3-Pack Kit (P/N33P2751).2. Two half-high (HH) bays can be combined to support a single fullhigh(FH) device.3. This bay supports optical drives only.4. This bay supports a floppy disk drive only.RM ARM BCD-ROMFDDHDD 6HDD 5HDD 4HDD 3HDD 2HDD 1x235 front view78 Configuration and Options Guide