configuration and options guide - IBM Quicklinks

Refer to the Important Notices section for important noticesIntellistation A Pro 6224 Hard Disk Drive (HDD) and Optical StorageOptionsSBBNumberOptionNumberDescription Bays Supported Height MaximumQuantity 1SATA HDDs 202R8747 09N4253 80GB 7200 RPM SATA HDD 3 ... 6 SL 202R8748 09N4254 160GB 7200 RPM SATA HDD 3 ... 6 SL 2Fixed (Nonhot-swap) Ultra320 HDDs32P0753 32P0723 36.4GB 10K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0751 32P0784 36.4GB 15K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0754 32P0724 73.4GB 10K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0752 32P0785 73.4GB 15K rpm Ultra320 SCSI HDD 3 ... 6 SL 432P0755 32P0725 146.8GB 10K rpm Ultra320 SCSI HDD 3 ... 6 SL 4Optical Devices 332P8852 10K3782 48x-20x CD-ROM Internal IDE Drive (Black) 1, 2 HH 290P4239 22P7042 48x/32x/48x Max CD-RW 1, 2 HH 226K8793 73P3305 Multi-Burner Plus 1, 2 HH 226K8792 73P3300 48x/32x/48x/16x Max CD-RW/DVD-ROMCombination Drive1, 2 HH 202R3278 22P6950 16x Max RAM-Read DVD-ROM Drive 1, 2 HH 21. Up to four SATA HDDs are supported with the installation of the optional ServeRAID-7t SATA RAID controller.2. Mixing of different HDD technologies is supported. Follow installation order provided with the Bay Usage table.3. Standard optical drive is installed in Bay 1.Bay 1Form Factor Height FrontAccessUsage1 133mm (5.25in) HL Yes Std. Optical2 133mm (5.25in) HH Yes Optical/Tape3 89mm (3.5in) SL Yes Zip, Tape, HDD4 ... 6 89mm (3.5in) SL No Std. HDD 2Note: HDDs are installed in the following order: bays 4, 5, 6 and 3.1. The installation order for adding additional HDDs depends upon the A Promodel. For SCSI models, install all additional SCSI HDDs, then install any SATAHDDs. For SATA models, install all additional SATA HDDs, then install any SCSIHDDs.2. Standard HDD is installed in bay 4.Chapter 5. IntelliStation A Pro 6224 41