configuration and options guide - IBM Quicklinks

Typical Rack Power ConfigurationsTypical Rack Power Configurations :Simple: two Rack PDUs(two circuits, 14 outlets)RackCabinetSimple: three Rack PDUsand one Front-end PDU(single circuit, 21 outlets)RackCabinetPDURedundant: six Rack PDUsand two Front-end PDUs (dualcircuit, 42 outlets)PDURackCabinetPDUPDU(4)PDUPDUPDURack PDU7 outlets - C131 inlet - C20PDUPDU(4)PDUPDUFEFront-end PDU3 outlets - C191 inlet - hardwiredFEFE(2)(5)(5)Notes (reference both this and the previous page):(1) Each device usually comes with a power cord. The PDU requires the power cord to have an IEC320-C14 plug. Order94G7448 (14ft) if appropriate cord is not provided with the device.(2) Each PDU and UPS comes with a country-specific power cord.(3) Internal rack power cable is provided with APC SmartUPS 5000 UPS.(4) One 2m internal rack power cable provided withDPI Rack PDU.(5) Line cord provided with Front-end PDU.(6) UPS comes with a country-specific power cord or a terminal block.(7) Devices with C20 power inlets included 2.8m C19 to C20 power cords.(8) High Density PDU includes hardwired line cord.(9) Option 23K4809 provides a C13 to C20 power cord to attach normal devices with C14 power inletsdirectly to Front-end or High Density PDUs.(10) Includes L5-20P to L5-15R adapter cable.(11) P/S = Power SupplyCustomers are responsible for providing a dedicated circuit for each line cord protected with an appropriatecircuit breaker .Standard Racks9306-420, 421Enterprise Racks9308-42P, X, S, ERack Rules and PDU CapacitiesNetBAY and DPI PDUs cannot be mixed in the same side-wallcompartment.DPI Rack PDUs can be cabled to NetBAY Front-end PDUs.PDUs/RackStandard9306-Enterprise9306-9308250 420,4212-bay 2-bay 2-bay 3-bay 4-bayRack PDUs 4 8 8 8 129306-250ACUBDAUBFront-end PDUs 2 4 2 4 4High Density PDUs 2 4 4 4 4Total PDUs 4 12 8 12 16AUBEFCD296 Configuration and Options Guide