SIMOVERT MV Medium-Voltage Drives 660 kVA to 9100 ... - Industry

More documents

Recommendations

Info

SIMOVERT MV6SE80 Drive ConvertersOptionsDescription of the optionsDescription of the option Comment Use with SIMOVERT MV in versionOrderCode2.3 kV3.3 kV4.16 kVair-cooled2 x 4.16 kVair-cooled6.0 kV6.6 kVair-cooled2 x 4.16 kV2.3 kV3.3 kV4.16 kVwatercooledwatercooled3Circuit versions / special optionsL01 24-pulse diode rectifierA 24-pulse diode rectifier can be used if harmonics fedback into the line supply are to be kept to a minimum.Drive converters with a power section connected inparallel can also be operated as 24-pulse system usingthis option (refer to the engineering information andinstructions, Page 6/17).For 6SE8008-..., 6SE8010-_BA.. and 6SE8013-_CA..drive converter types, option L01 results in the cabinetwidth being increased by 1200 mm, or 600 mm for allother types.L03L72Grounding switch for DC link1 grounding switch for grounding the DC link, mechanicallyoperated. It must only be operated when the DClink is discharged. Auxiliary contacts of the groundingswitch are connected in the circuit-breaker controlcircuit for interlocking. The cabinet width increases by600 mm (except in conjunction with L08).Braking chopperA braking chopper is available so that drives usingdiode rectifiers can be braked.For 6SE8008-..., 6SE8010-_BA.. and 6SE8013-_CA..drive converter types option L72 does not result in thecabinet width being increased, but results in the cabinetwidth being increased by 600 mm 1 ) for all othertypes.For power data refer to page 6/18Water-cooled versionPlate-type heat exchanger with stainless steel platesW01 Water-to-water cooling unit with redundant pumps anda stainless steel plate-type heat exchanger.Option W01 results in the cabinet width beingincreased (refer to the dimension drawings).W02Water-to-water cooling unit with redundant pumps andredundant stainless steel plate-type heat exchanger.The pumps and heat-exchanger can be replaced whilethe drive is operational.Option W02 results in the cabinet width beingincreased (refer to the dimension drawings).Plate-type heat exchanger with titanium platesW10 Water-to-water cooling unit, non-redundant, with atitanium plate-type heat exchanger (without titaniumpiping on the raw-water side).Application: For aggressive raw water supplies, suchas salt waterW11W12OthersW50Water-to-water cooling unit with redundant pumpsand a titanium plate heat exchanger (without titaniumpiping on the raw-water side).Application: For aggressive raw water supplies, suchas salt water.Option W11 results in the cabinet width beingincreased (refer to the dimension drawings).Water-to-water cooling unit with redundant pumpsand a redundant titanium plate-type heat exchanger(without titanium piping on the raw-water side).Application: For aggressive raw water supplies, suchas salt water.Option W12 results in the cabinet width beingincreased (refer to the dimension drawings).3-way valve to control the de-ionized watertemperaturePartiallyredundantFullyredundantNonredundantPartiallyredundantFullyredundant¦ –Refer tothe informationonPage 6/17¦ ¦ –Refer totheinformationon Page6/17¦ ¦ ¦ ¦ ¦■ ■ ■ ■ ■– – – ¦ ¦– – – ¦ ¦– – – ¦ ¦– – – ¦ ¦– – – ¦ ¦See Page 6/7 – – – ¦ ¦½ Option possible ■ On request – Not available1) The required brake resistor is not included in the scope of supply.3/18 Siemens DA 63 · 2004
SIMOVERT MV6SE80 Drive ConvertersOptionsOrderCodeDescription of the option Comment Use with SIMOVERT MV in version2.3 kV3.3 kV4.16 kVair-cooled2 x 4.16 kVair-cooled6.0 kV6.6 kVair-cooled2 x 4.16 kV2.3 kV3.3 kV4.16 kVwatercooledwatercooledMechanical versionsM11M23Dust protectionDoors with filter elements. Front-mounted so that thefilter element can be replaced with the doors closedand the drive converter operational.Caution: When filter elements are used, the outputmust be limited to 98% of the rated output.Degree of protection IP23With fan cover, corresponding to IP23.Caution: Cubicle depth increases by 50 mm.¦ ¦ ¦ – –¦ ¦ ¦ Standard Standard3M41M43Degree of protection IP41Wire-mesh doors (1 mm) and fan coverDegree of protection IP43With coverFan coveronly IP21With L08 orY15:Fan coversonly IP23¦ ¦ ¦ – –– – – ¦ ¦To achieve with M23 and M41M57Degree of protection IP54Cabinet with internal air-to-water cooler.Not availabletogether withoption L17– – – ■ ■M59M60Cabinet doors without air intake openingsAir intake from below through floor panelswith cut-outs.LocksDoors can be locked using integrated safety locks.Caution:please notethe informationon page 6/6¦ ¦ – – –¦ ¦ ¦ ¦ ¦M65M66Emergency operation in the event of fan failureOperation can be continued at a lower output(emergency operation) when a fan fails.Refer to Page 6/6 for specifications.Suitable for marine applicationsAccording to the requirements of themarine classification societies:Lloyds Register of Shipping, American Bureau ofShipping, Germanischer Lloyd, Bureau Veritas,Det Norske VeritasChinese Classification SocietyY09 Special paint finish according to RAL ...Deviating from the standard RAL 7032RAL No. must be specified in plain text.Only appliesfor the maindrive converterfansIncludes theoptions Y09,L33, and L55.Not withoption L17Fans alwaysRAL 7032¦ – – – –– – – ¦ ¦¦ ¦ ¦ ¦ ¦Marine version with individual certificateV10 Individual certificate fromGermanische Lloyd (GL)for non-essential servicesV20V30V50V60V70Individual certificate fromLloyds Register of Shipping (LRS)for non-essential servicesIndividual certificate fromBureau Veritas (BV)for non-essential servicesIndividual certificate fromDet Norske Veritas (DNV)for non-essential servicesIndividual certificate fromAmerican Bureau of Shipping (ABS)for non-essential servicesIndividual certificate fromChinese Classification Society (CCS)for non-essential servicesIncludes M66 – – – ¦ ¦Includes M66and L86Includes M66and Y75– – – ¦ ¦– – – ¦ ¦Includes M66 – – – ¦ ¦Includes M66 – – – ¦ ¦Includes M66and coremarkings– – – ¦ ¦½ Option possible ■ On request – Not availableSiemens DA 63 · 2004 3/19
Page 5 and 6: Siemens DA 63 · 20040/3
Page 7 and 8: SIMOVERT MVOverview11/2 Application
Page 9 and 10: SIMOVERT MVOverview 1ApplicationsSI
Page 11 and 12: SIMOVERT MVOverview 1Examples of or
Page 13 and 14: SIMOVERT MVSystemdescription2/2 Tec
Page 15 and 16: SIMOVERT MVSystem descriptionTechni
Page 17 and 18: SIMOVERT MVSystem descriptionTechni
Page 19: SIMOVERT MVSystem descriptionOperat
Page 22 and 23: SIMOVERT MV6SE80 Drive ConvertersDe
Page 29 and 30: SIMOVERT MV6SE80 Drive ConvertersSe
Page 37: SIMOVERT MV6SE80 Drive ConvertersSe
Page 41 and 42: SIMOVERT MV6SE80 Drive ConvertersOp
Page 47 and 48: SIMOVERT MVMotorsRib-cooled H-compa
Page 49 and 50: Rib-cooled H-compacthigh-voltage mo
Page 51 and 52: SIMOVERT MVMotorsRib-cooled H-compa
Page 83 and 84: H-compact PLUSmodular high-voltage
Page 85 and 86: SIMOVERT MVMotors4H-compact PLUSmod
Page 87 and 88: Cooling Cooling Partial load values
Page 89 and 90:
Cooling Cooling Partial load values
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Cooling Partial load values for pum
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
SIMOVERT MVDocumentation5/2 Documen
Page 107 and 108:
SIMOVERT MVEngineeringinformation6/
Page 109 and 110:
SIMOVERT MVEngineering informationD
Page 111 and 112:
SIMOVERT MVEngineering informationD
Page 113 and 114:
Water coolingGeneral informationThe
Page 115 and 116:
SIMOVERT MVEngineering informationV
Page 117 and 118:
SIMOVERT MVEngineering informationC
Page 119 and 120:
Motors 6.0 kV and 6.6 kVSIMOVERT MV
Page 121 and 122:
SIMOVERT MVEngineering informationE
Page 123 and 124:
SIMOVERT MVEngineering informationS
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Indoor cable entrance fittings (con
Page 131 and 132:
SIMOVERT MVDimension drawings7/2 SI
Page 133 and 134:
SIMOVERT MVDimension drawingsSIMOVE
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Water-cooled drive converters 2 x 4
Page 145 and 146:
Page 147 and 148:
SIMOVERT MVDimension drawingsHigh-v
Page 149 and 150:
SIMOVERT MV1LA4 rib-cooled, self-ve
Page 151 and 152:
Page 153 and 154:
SIMOVERT MV1PQ4 rib-cooled, force-v
Page 155 and 156:
H-compact PLUS shaft height w 560 1
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
H-compact PLUS shaft height 630 1RA
Page 169 and 170:
H-compact PLUS shaft height 630 1RN
Page 171 and 172:
H-compact PLUS shaft height 630 1RQ
Page 173 and 174:
Page 175 and 176:
SIMOVERT MVAppendixA/2 Environment,
Page 177 and 178:
SIMOVERT MVAppendixOrder number ind
Page 179 and 180:
PageAAir-cooled drive converters fo
Page 181 and 182:
SIMOVERT MVAppendixSiemens contacts
Page 183 and 184:
SIMOVERT MVAppendixCustomer Support
Page 185 and 186:
SIMOVERT MVAppendixNotesASiemens DA
Page 187 and 188:
Catalogs of theAutomation and Drive
show all

SIMOVERT MV Medium-Voltage Drives 660 kVA to 9100 ... - Industry

Create successful ePaper yourself

Delete template?

Save as template?