SIMOVERT MV Medium-Voltage Drives 660 kVA to 9100 ... - Industry

More documents

Recommendations

Info

MotorsSIMOVERT MVRib-cooled H-compacthigh-voltage motorsTechnical data (continued)For operation with theSIMOVERT MV drive converter,noise will increase byc. +5 dB(A) at the quoted operatingpoints.Following measures can betaken to reduce noiseemissions:Noise reduction elementsNoisereductionapprox.dB(A)Air intake damper + sound protection sheath (LED + SDM) 6Sound-absorbing cover (SSH) 84Self- and force-ventilated motors 1LA4/1PQ4The technical data of the (The data are valid for sinusoidalself- and force-ventilated supply)H-compact motors (1LA4/1PQ4 series) for operation withSIMOVERT MV are listed on thefollowing pages:¦ For fan and pump drives(M ~ n 2 )¦ For constant-torque drives(M =const)Installation altitude, cooling air temperaturePermissible output P relative to the rated output P N as a function ofthe cooling air temperature and installation altitude.Cooling airtemperatureInstallation altitude above sea level1000 m 1500 m 2000 m 2500 m 3000 m30 °C 100% 100% 100% 98% 95%35 °C 100% 100% 97% 94% 91%40 °C 100% 97% 93% 90% 87%45 °C 95% 92% 88% 85% 83%50 °C 90% 87% 84% 81%55 °C 85% 82%60 °C 80%Explanations and secondary conditionsInsulation systemUtilizationOutput and torqueCoolant temperatureInstallation altitudeVoltage rangeOverload capabilityMICALASTIC VPI, temperature rise class FAccording to temperature rise class F: refer to the technical dataAccording to temperature rise class B: the specified outputs and torques are reduced to 88%For continuous duty S140 °C De-rating for different cooling-medium temperatures and/or installation altitudes,0 – 1000 m refer to “Installation altitude, cooling air temperature”Rated (thermal) for ± 5% voltage fluctuationFor continuous operation with voltage fluctuations in the range of ± 10%, it is necessary to de-rate the outputor reduce the torque by 5%The motors can withstand 150% rated current at rated voltage and rated frequency for 2 min.Tolerances According to DIN EN 60 034Efficiency – 0.1 (1 – h) Starting torque – 15% to + 25%Power factor – (1 – cos j) / 6 Stall torque – 10%Slip ± 20% Moment of inertia ± 10%Starting current + 20%Directions of rotation,fan versions1LA4 shaft height 500 mm:For clockwise and counter-clockwise rotation (fan operation is independent of the direction of rotation)1LA4 shaft height 560 and 630 mm:Either for clockwise or counter-clockwise rotation, it is not possible to provide external fans which are independentof rotating direction.Separately-driven fans are required for motor design independent of rotating direction (1PQ4 series)4/4 Siemens DA 63 · 2004
SIMOVERT MVMotorsRib-cooled H-compacthigh-voltage motors4Comments regarding thetechnical dataThe technical data specifiedin the following only refer to themain applications as fanand pump drives (M ~ n 2 ) andconstant-torque drives(M = const.).It goes without saying thatother load characteristics arepossible. The selection andordering data for constanttorque drives contains the thermallypermissible torque for thedifferent speed setting ranges.Refer to Page 6/12 foradditional information.1LA4 motors for 6.0 kVand 6.6 kVSIMOVERT MV drive convertersfor output voltages of 6.0 kVand 6.6 kV include an output filter.Please refer to the relatingnotes on Page 3/5 and 6/13respectively.The selection and ordering dataof the motors for drive converteroperation correspond to thosefor mains operation and areavailable on request.Siemens DA 63 · 2004 4/5
Page 5 and 6: Siemens DA 63 · 20040/3
Page 7 and 8: SIMOVERT MVOverview11/2 Application
Page 9 and 10: SIMOVERT MVOverview 1ApplicationsSI
Page 11 and 12: SIMOVERT MVOverview 1Examples of or
Page 13 and 14: SIMOVERT MVSystemdescription2/2 Tec
Page 15 and 16: SIMOVERT MVSystem descriptionTechni
Page 17 and 18: SIMOVERT MVSystem descriptionTechni
Page 19: SIMOVERT MVSystem descriptionOperat
Page 22 and 23: SIMOVERT MV6SE80 Drive ConvertersDe
Page 29 and 30: SIMOVERT MV6SE80 Drive ConvertersSe
Page 39 and 40: SIMOVERT MV6SE80 Drive ConvertersOp
Page 47 and 48: SIMOVERT MVMotorsRib-cooled H-compa
Page 49: Rib-cooled H-compacthigh-voltage mo
Page 53 and 54: Rib-cooled H-compacthigh-voltage mo
Page 83 and 84: H-compact PLUSmodular high-voltage
Page 85 and 86: SIMOVERT MVMotors4H-compact PLUSmod
Page 87 and 88: Cooling Cooling Partial load values
Page 95 and 96: Cooling Partial load values for pum
Page 101 and 102:
Cooling Partial load values for pum
Page 103 and 104:
Cooling Partial load values for pum
Page 105 and 106:
SIMOVERT MVDocumentation5/2 Documen
Page 107 and 108:
SIMOVERT MVEngineeringinformation6/
Page 109 and 110:
SIMOVERT MVEngineering informationD
Page 111 and 112:
SIMOVERT MVEngineering informationD
Page 113 and 114:
Water coolingGeneral informationThe
Page 115 and 116:
SIMOVERT MVEngineering informationV
Page 117 and 118:
SIMOVERT MVEngineering informationC
Page 119 and 120:
Motors 6.0 kV and 6.6 kVSIMOVERT MV
Page 121 and 122:
SIMOVERT MVEngineering informationE
Page 123 and 124:
SIMOVERT MVEngineering informationS
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Indoor cable entrance fittings (con
Page 131 and 132:
SIMOVERT MVDimension drawings7/2 SI
Page 133 and 134:
SIMOVERT MVDimension drawingsSIMOVE
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Water-cooled drive converters 2 x 4
Page 145 and 146:
Page 147 and 148:
SIMOVERT MVDimension drawingsHigh-v
Page 149 and 150:
SIMOVERT MV1LA4 rib-cooled, self-ve
Page 151 and 152:
Page 153 and 154:
SIMOVERT MV1PQ4 rib-cooled, force-v
Page 155 and 156:
H-compact PLUS shaft height w 560 1
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
H-compact PLUS shaft height 630 1RA
Page 169 and 170:
H-compact PLUS shaft height 630 1RN
Page 171 and 172:
H-compact PLUS shaft height 630 1RQ
Page 173 and 174:
Page 175 and 176:
SIMOVERT MVAppendixA/2 Environment,
Page 177 and 178:
SIMOVERT MVAppendixOrder number ind
Page 179 and 180:
PageAAir-cooled drive converters fo
Page 181 and 182:
SIMOVERT MVAppendixSiemens contacts
Page 183 and 184:
SIMOVERT MVAppendixCustomer Support
Page 185 and 186:
SIMOVERT MVAppendixNotesASiemens DA
Page 187 and 188:
Catalogs of theAutomation and Drive
show all

SIMOVERT MV Medium-Voltage Drives 660 kVA to 9100 ... - Industry

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?