User's Guide - LINX Data Terminals

The fifth (and final) screen shown will be dependent on the application modeselected in the “Terminal” menu. These options are:1. “HOST CMD Lang”This mode will display “Waiting for Host” until the HCL controlprogram is started on the Host. Once the Host has connected, thedisplay is under the control of the Host program.2. “User ‘C’ APP”In this mode, the display contents are completely controlled by the ‘C’executable.3. “Linx T&A PGM”In this mode, the display is also controlled by the T&A application.Note: The display prompts and messages are defined by the user via a“configuration utility”.4. “User Exe w/EVO”This mode operates as Mode #2, except that the HOST application isthe Linx Evolution Software.5. “VT100 Emulation”This mode provides a VT100 TELNET Client Terminal Emulation.For usage, see Appendix G.6. “Linx PGM #4”In this mode, the display will be controlled by the application. Thisapplication is TBD.PLEASE NOTE:The MENUS can ONLY be accessed when the “Press F1 to enter SETUP menu”screen is displayed and when the STATUS Display is available!LINX 7-5 User's Guide Preface • 13