User's Guide - LINX Data Terminals

More documents

Recommendations

Info

Installing PeripheralsBack Plate connectorsCOM1/COM2 (DB9-M) ports are used to connect RS232 peripherals such as aserial printer, scale or a NULL modem cable from a PC. COM1 is also used as analternative method to update the flash program files.Com Port Connector Pins: (both identical)1 DCD (Data Carrier Detect)2 RXD ( Receive Data)3 TXD (Transmit Data)4 DTR (Data Terminal Ready)5 GND (Ground)6 DSR (Data Set Ready)7 RTS (Request to Send)8 CTS (Clear to Send)9 RI (Ring Indicator)Ethernet (RJ45) port is used to connect to the network with CAT-5 (or CAT-6)cable.38 • Installing Peripherals LINX 7-5 User's Guide
Power (3-pin Molex) port connects to the +5V-DC switching Power Supplyprovided with the Linx7-5 terminal.Power Connector Pins:1 +5 Volts2 Chassis/Earth Ground3 Signal GroundDue to PC tracelimitations, the relaycurrent must not exceed 0.5ampsDigital I/O (DB9-F) port is used to connect external switches, relays and any otherdevices that can be monitored via a sensor, or controlled via a control line. There are3 TTL control lines that provide 20ma for driving solid-state relays or similar. Onemore control line uses a relay that may switch power to a load directly. The relay israted: 0.5A @125VAC or 1A @24VDC (max VDC=60v).Digital I/O Connector Pins:1 Sensor Line # 1 Input2 Sensor Line #2 Input3 Sensor Line #3 Input4 Relay Wiper (Control line #4)5 Relay NO Output (Control Line #4) (NO=Normally open)6 TTL Control Line #1 Output7 TTL Control Line #2 Output8 TTL Control Line #3 Output9 Signal GroundLINX 7-5 User's Guide Installing Peripherals • 39
Page 2: March 12, 2007Copyright LINX Data T
Page 8 and 9: Using the Linx 7-5 Data Collection
Page 10 and 11: perform local validation of input;
Page 12 and 13: Linx7-5 Block Diagram8 • Preface
Page 14 and 15: • Synchronous DRAM TestsSDRAM Tes
Page 16 and 17: Line1: ssssssss=Terminal Serial Num
Page 18 and 19: Linx7-5 Terminal Status DisplaysThe
Page 20 and 21: 'zzzz'This field displays (in Kbyte
Page 22 and 23: 3-Diagnostics< for next menuPress '
Page 24 and 25: NOTE: “User ‘C’ APP w/EVO”s
Page 26 and 27: Although this test menu can be oper
Page 28 and 29: Time DisplayLED Lamp TestThis test
Page 30 and 31: Linx7-5 Web ServerWeb Server Overvi
Page 32 and 33: 28 • Linx7-5 Web Server LINX 7-5
Page 34 and 35: Secured “Terminal Setup” PageIf
Page 36 and 37: Secured “Network Setup” PageIf
Page 38 and 39: DEFAULTVALID MIN/MAX RANGE"Code 39
Page 40 and 41: Secured “Password Control” Main
Page 44 and 45: Wand/Laser (special DB9-M) port pro
Page 46 and 47: Appendix BFilename MUST be the name
Page 48 and 49: Appendix CUsing FTP.EXE - Windows C
Page 50 and 51: TABLE 1Most useful Windows FTP clie
Page 52 and 53: Appendix EBefore setup,please read:
Page 54 and 55: APPENDIX FCabling requirements to u
Page 56 and 57: d. If "Green" the FIU diagnostic sh
Page 58 and 59: ANSI/VT52 ModeWraparound ModeKeyPad
Page 60 and 61: # Function Key # to provide (IP) "I

User's Guide - LINX Data Terminals

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?