User's Guide - LINX Data Terminals

Exiting Main MenuPressing EXIT from the Main Menu will exit the menus completely. The statusdisplay will appear, or in the case where a program has been already placed into theLinx7-5, whatever prompt the program defines.Diagnostics MenuLinx7-5 Menu DescriptionsOnce you have entered the diagnostics menu (by pressing ENTER from the 3-Diagnostics display, use “IN” and “OUT” to move through and select the diagnosticyou want to execute. Press ENTER to start the diagnostic. Pressing EXIT can stopmost diagnostics. Note: a test can be selected directly by pressing the test ID:0-9 andA-F.Terminal Menu1-Terminal Menu< for next MenuDEFAULTVALID MIN/MAXRANGE“Terminal Name” 0000000000 Max 16 Characters"Application Mode" HCL* CMD Lang (see text)"Time hhmmss" 000000 (0-23)(0-59)(0-59)"Date yymmddw" 040101 (02-29)(1-12)(1-31)"Menu Password" None 0-9999999"SupervisorPassword"None 0-9999999*HCL-“Host ControlLanguage”Terminal NameAllows defining a terminal name of up to 16 characters. This feature can helpmanage the Network but it is not required for normal operation. It can be used bythe Host/Server software to direct data to a specific LINX7-5 terminal.Application ModeThis selects the type of “user” application that will be executed by the terminal. Theoptions are:“HCL CMD Lang” (default) – Host controlled thin client“User ‘C’ APP” - User/VAR generated ‘C’ executable“Linx T&A PGM” - Table-drive Time and Attendance app.LINX 7-5 User's Guide Linx7-5 Menu System • 19