User's Guide - LINX Data Terminals

Time DisplayLED Lamp TestThis test will display the current time and date. The display will auto-update when the timechanges at 1second intervals.This test will cycle all of the LED lamps in sequence. It is the user's responsibility to verifycorrect operation!COM Loopback TestCOM Transmit TestThis test will prompt the user for two parameters used by the test:Port(0,1) (0=COM1 1=COM2)BAUD (0-6) 0=1200 1=2400 2=4800 3=9600 4=19200 5=38400 6=57600On ‘ENTER” the test will start and display the results:“Testing Pass: xxxxxxxx Fail: xxxxxxxx”Pressing the ‘EXIT” key will stop the test.This test will prompt the user for two parameters used by the test:Port(0,1) (0=COM1 1=COM2)BAUD (0-6) 0=1200 1=2400 2=4800 3=9600 4=19200 5=38400 6=57600The test message is “The Quick Brown Fox Jumps Over the Lazy Dogs Back”.On ‘ENTER” the test will start and display the results:Line1: “Testing COMx Transmit at xxxxx BAUD”Line2: “TxPackets: xxxxxxxxPressing the ‘EXIT” key will stop the test.COM Receive TestThis test will prompt the user for two parameters used by the test:Port(0,1) (0=COM1 1=COM2)BAUD (0-6) 0=1200 1=2400 2=4800 3=9600 4=19200 5=38400 6=57600The test message is “The Quick Brown Fox Jumps Over the Lazy Dogs Back”.On ‘ENTER” the test will start and display the results:24 • Linx7-5 User Diagnostics LINX 7-5 User's Guide