ISU AT Command Reference

More documents

Recommendations

Info

ISU AT Command ReferencePhase I AT Commands5.55 +CGSN - Serial NumberExec Command: +CGSNQuery the phone IMEI.5.56 +CMEE - Report Mobile Equipment ErrorSet Command: +CMEE=[]Set mobile equipment error reporting level. takes the following values:0 Disable error reporting (use ERROR result code) (default).1 Enable numeric error reporting.2 Enable verbose error reporting.An example of an error report is:+CME ERROR: where can be the number or text listed below:0 phone failure1 no connection to phone2 phone-adaptor link reserved3 operation not allowed4 operation not supported5 PH-SIM PIN required6 PH-FSIM PIN required7 PH-FSIM PUK required10 SIM not inserted11 SIM PIN required12 SIM PUK required13 SIM failure14 SIM busy15 SIM wrong16 incorrect password17 SIM PIN2 required18 SIM PUK2 required20 memory full21 invalid index22 not found23 memory failure24 text string too long25 invalid characters in text string26 dial string too long27 invalid characters in dial stringVersion 2.6March 30, 2006 26
ISU AT Command ReferencePhase I AT Commands30 no network service31 network timeout32 emergency calls only40 network personalization PIN required41 network personalization PUK required42 network subset personalization PIN required43 network subset personalization PUK required44 service provider personalization PIN required45 service provider personalization PUK required46 corporate personalization PIN required47 corporate personalization PUK required100 unknownRead Command: +CMEE?Query mobile equipment error reporting level. The response is in the form:+CMEE: Test Command: +CMEE=?List the supported error reporting level. The response is in the form:+CMEE: (supported s)5.57 +CPAS - Phone Activity StatusExec Command: +CPASQuery phone activity status. The response is in the form:+CPAS: where can take the following values:0 Ready (allows commands).1 Unavailable (does not allow commands).2 Unknown (may not respond to commands).3 Data Call Ringing (allows commands).4 Data Call In Progress (allows commands).Models 9500 with INC0620, 9520 with RAC0620, and 9521 with RAC0620 returnfrom status 4 to status 3 at the end of a data call. They subsequently return to status0 after reset or power cycle.Version 2.6March 30, 2006 27
Page 1 and 2: Version 2.6ISU AT Command Reference
Page 3 and 4: ISU AT Command ReferenceRevision Hi
Page 5 and 6: ISU AT Command ReferenceTable of Co
Page 7 and 8: ISU AT Command ReferenceTable of Co
Page 9 and 10: ISU AT Command ReferenceIntroductio
Page 11 and 12: ISU AT Command ReferenceIntroductio
Page 13 and 14: ISU AT Command ReferenceModem Overv
Page 15 and 16: ISU AT Command ReferenceCommand Ove
Page 17 and 18: ISU AT Command ReferenceCommand Ove
Page 19 and 20: ISU AT Command ReferencePhased Impl
Page 21 and 22: ISU AT Command ReferencePhased Impl
Page 23: ISU AT Command ReferencePhase I AT
Page 26 and 27: ISU AT Command ReferencePhase I AT
Page 38: ISU AT Command ReferencePhase I AT
Page 42 and 43: ISU AT Command ReferencePhase II AT
Page 56 and 57: ISU AT Command ReferencePhase III A
Page 66 and 67: ISU AT Command ReferencePhase IV AT
Page 76 and 77: ISU AT Command ReferencePhase V AT
Page 78 and 79: ISU AT Command ReferencePhase VI AT
Page 84 and 85:
ISU AT Command ReferencePhase VI AT
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
ISU AT Command ReferenceS-Register
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
ISU AT Command ReferenceSummary of
Page 98 and 99:
ISU AT Command ReferenceInformative
show all

ISU AT Command Reference

Create successful ePaper yourself

Delete template?

Save as template?