ISU AT Command Reference

ISU AT Command ReferenceSummary of Result CodesTable 11-1: V.25ter/Hayes Result Codes (continued)as verbose ‘+DR: V42B NONE’ Data call connected with no data compression.as verbose ‘+DR: V42B TD’ Data call connected with V.42bis compressionenabled on transmit direction.as verbose ‘+DR: V42B RD’ Data call connected with V.42bis compressionenabled on receive direction.as verbose ‘+DR: V42B’ Data call connected with V.42bis compressionenabled on both transmit and receive direction.Table 11-2: GSM 7.07 Result CodesNumeric (V0) Verbose (V1) Descriptionas verbose ‘+CR: ASYNC’ Asynchronous transparent data connection.as verbose ‘+CR: REL ASYNC’ Asynchronous non-transparent data connection.as verbose ‘+CME ERROR: Command not accepted. See section 4.10.as verbose‘+CREG: [,,]Registration indication status (unsolicited ifenabled). See section 4.30.as verbose ‘+CRING: ASYNC‘ Asynchronous transparent data call indication.as verbose ‘+CRING: REL ASYNC‘ Asynchronous non-transparent data connection.as verbose ‘+CRING: VOICE‘ Voice call connection.Table 11-3: GSM 7.05 Result CodesNumeric (V0) Verbose (V1) Descriptionas verbose‘+CMTI: ,’SMS-DELIVER message indication (unsolicitedif enabled). See section 4.18.‘+CMT:SMS-DELIVERs message indication (unsolicitedas verbose[],’if enabled). See section 4.18.(PDU mode)as verbose‘+CDS:’ SMS-STATUS-REPORTs message indication(PDU mode)(unsolicited if enabled). See section 4.18.as verbose ‘+CMS ERROR: SMS command failed. See section 4.11.Table 11-4: Iridium-specific Result CodesNumeric (V0) Verbose (V1) Descriptionas verbose‘READY’Ready to receive SBD binary message data fromDTE. See section 8.10.as verbose ‘+AREG:,’ Auto-registration event report. See section 10.15.as verbose ‘+CIEV:’ Indicator event report. See section 10.2.Version 2.6March 30, 2006 88