ISU AT Command Reference
ISU AT Command Reference
ISU AT Command Reference
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ISU</strong> <strong>AT</strong> <strong>Command</strong> <strong>Reference</strong>Phase IV <strong>AT</strong> <strong>Command</strong>s8.8 +WDLDM - IRLP Dynamic Link Delay MeasurementSet <strong>Command</strong>: +WDLDM=[[,[,]]]Set the DCE dynamic link delay measurement parameters. can take the following values:0 measurement off (default)1 measurement on denotes the measurement interval and can take the following values: 1-255(in 1000-ms unit). Default is 15 for 15000 ms. denotes the delay tolerance in the link delay difference and can take the following values:1-100 (in 1% unit). Default is 10%.Read <strong>Command</strong>: +WDLDM?Query the current parameter settings. The response is in the form:+WDLDM: ,,Test <strong>Command</strong>: +WDLDM=?List the supported parameter settings. The response is in the form:+WDLDM: (supported s), (supported s),(supporteds)8.9 +WDAV - Register or Deregister an RS232 DAV Data PeripheralSet <strong>Command</strong>: +WDAV=[[,]]Register or deregister an RS232 DAV Data Peripheral (DP). can take on the following values:0 Deregister peripheral1 Register Type 1 RS232 DAV Data Peripheral can take on the following values:0 Encryption is not supported at this timeRead <strong>Command</strong>: +WDAV?Query the current DP registration parameter settings. The response is in the form:+WDAV:,Test <strong>Command</strong>: +WDAV=?List the supported DP registration parameters. The response is in the form:+WDAV:(supported s),(supported s)Version 2.6March 30, 2006 61
Change language