ISU AT Command Reference
ISU AT Command Reference
ISU AT Command Reference
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>ISU</strong> <strong>AT</strong> <strong>Command</strong> <strong>Reference</strong>Phase IV <strong>AT</strong> <strong>Command</strong>s8.15 +SBDD - Short Burst Data: Clear SBD Message Buffer(s)Exec <strong>Command</strong>: +SBDD[]This command is used to clear the mobile originated buffer, mobile terminated buffer or both.• The parameter identifies which buffers are cleared.0: Clear the mobile originated buffer.1: Clear the mobile terminated buffer.2: Clear both the mobile originated and mobile terminated buffers.• Using this command or power cycling the phone are the only means by which both buffers arecleared.• The mobile terminated buffer will be cleared when an SBD session is initiated.• Sending a message from the <strong>ISU</strong> to the ESS does not clear the mobile originated buffer.• Reading a message from the <strong>ISU</strong> does not clear the mobile terminated buffer.<strong>Command</strong> Response:0: Buffer(s) cleared successfully.1: An error occurred while clearing the buffer(s).8.16 +SBDC - Short Burst Data: Clear SBD MOMSNExec <strong>Command</strong>: +SBDCThis command will clear (set to 0) the mobile originated message sequence number (MOMSN) stored inthe <strong>ISU</strong>.• The MOMSN is maintained even after power cycle.<strong>Command</strong> Response:0: The MOMSN was cleared successfully.1: An error occurred while clearing the MOMSN.Version 2.6March 30, 2006 66
Change language