ISU AT Command Reference
ISU AT Command Reference
ISU AT Command Reference
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>ISU</strong> <strong>AT</strong> <strong>Command</strong> <strong>Reference</strong>Phase III <strong>AT</strong> <strong>Command</strong>s7 Phase III <strong>AT</strong> <strong>Command</strong>s7.1 A - Answer (Revised)Answer immediately. This causes the <strong>ISU</strong> to answer the incoming data or voice call.7.2 D - Dial (Revised)Dial a data or voice call number. The dial command causes the <strong>ISU</strong> to enter originate mode and act as anauto dialer for connection to other modems or voice lines. The usual format is <strong>AT</strong>Dnx..x where n is a DialModifier and x is a number. The following are valid numbers: 0123456789*#ABC. Dial modifiers areused to alter the manner in which the <strong>ISU</strong> dials.L Redial last number.P Use pulse dialing.TNo action, compatibility only.Use tone dialing.No action, compatibility only.+ International dialing prefix. Allows the international access code to be omitted from dialstring.> Direct dial from phonebook locations. See subsection below for further details.; Start up a voice call. This modifier should be given after the dialing digits (or modifiers).Any character received from the DTE during the call establishment phase will cause the call attempted tobe terminated.Version 2.6March 30, 2006 47
Change language