ISU AT Command Reference

ISU AT Command ReferencePhase II AT Commands6.22 +CSCA - SMS Service Center AddressSet Command: +CSCA=[,]Set command updates the SMSC address, through which mobile originated SMs are transmitted. In PDUmode, setting is used by the send and write commands, but only when the length of the SMSC addresscoded into parameter equals zero.: GSM 04.11 RP SC address Address-Value field in string format (i.e., enclosed by quotes ““);: GSM 04.11 RP SC address Type-of-Address octet in integer format;Read Command: +CSCA?Read command returns the current service center address. Response is in the form:+CSCA: ,6.23 +CSCB - Select Cell Broadcast Message TypesSet Command: +CSCB=[[,[,]]]Set command selects which types of CBMs are to be received by the ME.No action, compatibility only.Read Command: +CSCB?Read command returns the current values for , and . Response is in the form:+CSCB: ,,Test Command: +CSCB=?Test command returns supported modes. Response is in the form:+CSCB: (list of supported s)6.24 +CSCS - Select TE Character SetSet Command: +CSCS=[]Set command informs the phone which character set is used by the DTE. Only the IRA characterset is currently supported. should be of string type enclosed by ““; for example, “IRA”.Valid values for are:"IRA" international reference alphabet (ITU-T T.50)Read Command: +CSCS?Read command returns the current character set used. Response is in the form:+CSCS: Test Command: +CSCS=?Test command returns the supported character set of the phone. Response is in the form:+CSCS: (list of supported s)Version 2.6March 30, 2006 44