ISU AT Command Reference

More documents

Recommendations

Info

ISU AT Command ReferencePhase III AT Commands7.13 +CCLK - Real-Time ClockSet Command: +CCLK=[]Sets the real-time clock of the ISU. If setting fails, ERROR is returned.: string type value; format is “yy/MM/dd,hh:mm:ss±zz”, where characters indicate year (two lastdigits), month, day, hour, minutes, seconds and time zone. There is no blank space between thetwo double quotes. Since time zone feature is not supported in Iridium, this particular field (±zz) isignored if it is entered. The range of valid years is between 1970 and 2058.For example, 15 th of May 2002, 22:10:00 hours can be set using +CCLK= “02/05/15,22:10:00”.Read Command: +CCLK?Read command returns the current setting of the clock.+CCLK: 7.14 -MSVTS - DTMF Generation in Voice CallSet Command: -MSVTS=Generate the specified DTMF tone (i.e., send tone DTMF message to network). The parameter shall consist of elements in a list where each element is separated by a comma. Each element should eitherbe (1) a single ASCII character; or (2) string that follows the format: [,] with each stringenclosed in square brackets “[]”. The string parameter values are defined as follows: specifies the string of tones to be played or generated. The valid values are (in ASCII):‘0’-’9’, ‘#’, ‘*’ specifies the duration of each tone in 180-millisecond unit. Default value is 1 for 180 ms.For example, the command string -MSVTS=1,[9,2],[5,3] will:1. Generate DTMF 1 with a duration of 180 ms (default).2. Generate DTMF 9 with a duration of 360 ms (2 * 180 ms).3. Generate DTMF 5 with a duration of 540 ms (3 * 180 ms).Test Command: -MSVTS=?List the supported parameter settings. The response is in the form:-MSVTS: (supported s),(supported s)Note: DTMF generated with the –MSVTS command is never played back locally as tones and is thereforeneither played nor muted under control of the –MSVLS command.Version 2.6March 30, 2006 54
ISU AT Command ReferencePhase III AT Commands7.15 -MSVTR - DTMF Received in Voice CallSet Command: -MSVTR=[]Disable or enable the receiving of DTMF messages from the network. takes one of the following values:0 Receiving of DTMF disabled (default).1 Receiving of DTMF enabled.If receiving DTMF is enabled, the ISU sends the following unsolicited result code every time a DTMFinband signaling data is received from the network while in a voice call:-MSTRX: ,where is the DTMF tone received (‘0’-’9’, ‘#’, ‘*’, ‘A’-’D’) and can be one of thefollowing:0 tone stopped (i.e. key released)1 tone started (i.e. key pressed)Read Command: -MSVTR?Query the current parameter settings. The response is in the form:-MSVTR: Test Command: -MSVTR=?List the supported parameter settings. The response is in the form:-MSVTR: (supported s)7.16 -MSVLS - Local DTMF Feedback SelectionSet Command: -MSVLS=[]Disable or enable playing of DTMF tones locally (i.e. feedback tones) while in a voice call. takes one of the following values:0 No mute. Play all DTMF tones (default) when pressed or received while in voice call.1 Enable mute mode. Mute both pressed or received DTMF tones while in voice call.Read Command: -MSVLS?Query the current parameter settings. The response is in the form:-MSVLS: Test Command: -MSVLS=?List the supported parameter settings. The response is in the form:-MSVLS: (supported s)Note: DTMF generated with the –MSVTS command is never played back locally as tones and is thereforeneither played nor muted under control of the –MSVLS command.Version 2.6March 30, 2006 55
Page 1 and 2:
Version 2.6ISU AT Command Reference
Page 3 and 4:
ISU AT Command ReferenceRevision Hi
Page 5 and 6:
ISU AT Command ReferenceTable of Co
Page 7 and 8:
ISU AT Command ReferenceTable of Co
Page 9 and 10:
ISU AT Command ReferenceIntroductio
Page 11 and 12: ISU AT Command ReferenceIntroductio
Page 13 and 14: ISU AT Command ReferenceModem Overv
Page 15 and 16: ISU AT Command ReferenceCommand Ove
Page 17 and 18: ISU AT Command ReferenceCommand Ove
Page 19 and 20: ISU AT Command ReferencePhased Impl
Page 21 and 22: ISU AT Command ReferencePhased Impl
Page 23: ISU AT Command ReferencePhase I AT
Page 26 and 27: ISU AT Command ReferencePhase I AT
Page 38: ISU AT Command ReferencePhase I AT
Page 42 and 43: ISU AT Command ReferencePhase II AT
Page 56 and 57: ISU AT Command ReferencePhase III A
Page 66 and 67: ISU AT Command ReferencePhase IV AT
Page 76 and 77: ISU AT Command ReferencePhase V AT
Page 78 and 79: ISU AT Command ReferencePhase VI AT
Page 90 and 91: ISU AT Command ReferenceS-Register
Page 96 and 97: ISU AT Command ReferenceSummary of
Page 98 and 99: ISU AT Command ReferenceInformative
show all

ISU AT Command Reference

Create successful ePaper yourself

Delete template?

Save as template?