Sun Hydraulics Catalog - BIBUS SK, sro

Circuit SaversACCUMULATOR SENSE, PUMP UNLOAD, PILOT CAPACITYFull Adjustment 5 Turns+ -21bc33Drain2PilotaLocatingShoulderPilot FlowCapacityTypicalCartridgeModel CodeCartridge DimensionsCavity a bcL C KInstallationTorque(Nm)0,75 L/min. QPAA – LAN T - 11A 35,0 22,2 63,5 67,8 69,3 45 - 501Accumulator■■■■■■■Maximum operating pressure = 350 bar.The pressure differential between unload and reset will be within +/- 1% of the stated ratio of the valvewith up to an additional 1,7 bar due to dynamic seal friction.The accumulator sensing area is positively sealed.The spool design of this valve allows it to maintain a fixed differential ratio because the areas arecreated by diameters on the spool that will not wear or change with use.Minimum clearance between the spool and sleeve, and seal on the pilot piston diameter significantlyreduce the potential for silting.When applying this cartridge, a separate drain line is required to prevent erratic operation caused bytank line pressure fluctuations.Careful consideration should be given when selecting an adjustment range. System pressure drops andflows tend to affect the operation of unloading valves. Low operating pressures combined with lowdifferential pressures result in a very narrow band between unload and reset, requiring precise systemdesign. High flow rates typically mean high pressure drops, which subtract from the differential withwhich the valve has to work.OPTION ORDERING INFORMATIONQ PA✱ – ✱✱✱Pilot FlowCapacityVersion Control** Adjustment Range Seal MaterialA 0,75 L/min. A 15% Nominal L Standard Screw A 70 - 210 bar N Buna-NDifferential Adjustment Standard Set at 70 barV VitonB 20% Nominal C* Tamper Resistant B 35 - 105 barDifferential Factory Set Standard Set at 35 barC 30% Nominal K Handknob C 140 - 350 barDifferential with Lock Knob Standard Set at 140 barD 50% Nominal * Special setting is required. D 18 - 55 barDifferential Specify at time of order. Standard Set at 18 bar** See page 178for informationon Control OptionsCustomer specifiedspecial settingstamped on hex.Visit www.sunhydraulics.com for current list pricing and complete technical information on all Sun products.168 Int’l Shortcut Catalogue #999-901-312