Sun Hydraulics Catalog - BIBUS SK, sro

WarrantyWARRANTY INFORMATION,PERFORMANCE ASSURANCE,AND APPLICATION LIMITATIONSCautionSun Hydraulics Limited manufactures a variety ofcartridge valves that will fit into the same Sun cavity. Eachcartridge is marked with a seven-digit part identification codeand a four-digit date code, stamped on the hex surfaces.Designers and users of Sun components are advised thatphysical interchangeability of cartridges does notnecessarily mean functional interchangeability. Whenreplacing any Sun cartridges, users should first check with themanufacturer's service literature, their local Sun distributor, orthe Sun factory before making any part substitutions.NOTE: To avoid serious injury, the manufacturer's serviceliterature must be consulted before working on anyhydraulic system.Limited WarrantySun Hydraulics Limited warrants its products free fromdefects in material, workmanship, and design for a period of threeyears after their installation, provided the installation date is lessthan one year after manufacture. “O-rings” and seals arespecifically exempted from this warranty. In no instance is thereany warranty of fitness for a particular use and Sun cannot and doesnot accept responsibility of any type for any of its products thathave been subjected to improper installation, improper application,negligence, tampering, or abuse, or which have been repairedor altered outside of the Sun Hydraulics factory. Sun HydraulicsLimited liability under this warranty shall extend only to repairor replacement, f.o.b. Sun’s factory, of any defective part orproduct determined by inspection as not conforming to thiswarranty. Sun makes no other warranties, expressed or implied,and is not responsible for any consequential damages resultingfrom use by any buyer or user, Sun Hydraulics’ liability beinglimited to the value of product sold or obligation to replace adefective part.Performance AssuranceAll Sun cartridges valves are individually tested at thefactory and preset to specific pressure or flow settings whereindicated in this catalogue. However, as the actual performanceof buyers' equipment cannot be reproduced in Sun's testinglaboratory, assurance of suitability of Sun products in thebuyer's application is the responsibility of the buyer.This is typically accomplished by the manufacture of aprototype followed by a test or qualification program on the partof the buyer.Application LimitationsSun product designs and manufacturing facilities havebeen specifically developed to provide products forcommercial, industrial and mobile hydraulic applications andSun products are only warranted for these types of uses. Sun'sdistributors are not authorised to approve the use of Sunproducts in any of the following applications:• Any steering or braking systems for passenger-carryingvehicles or on-highway trucks.• Aircraft or space vehicles.• Ordnance equipment.• Life support equipment.• Any end product which is used in a nuclear power plantapplication.Specific written approval for any application of Sun products in anyof the above named applications should be obtained from SunHydraulics. Consultation with Sun distributors or factory engineersis advisable in any situations where applicability is questionable.Visit www.sunhydraulics.com for current list pricing and complete technical information on all Sun products.Int’l Shortcut Catalogue #999-901-312 199