Sun Hydraulics Catalog - BIBUS SK, sro

Cartridge Control KitsService KitNumberDescriptionUse specifically withControl/CartridgeDescriptionAdjustmentScrew Kit991-112-003 Viton991-112-007 Buna-NAdjustmentScrew Kit991-212-003 Viton991-212-007 Buna-NMaximumSettingLimiter(Zinc plated steel)991-022CKCA-L**CKCB-L**CKCC-L**CKEA-L**CKEB-L**CKEC-L**CKCD-L**CPCA-L**CKED-L**CPEA-L**All models with an Ladjustment control (ExceptSeries 0 and counterbalance.)The maximum setting limiterscan only be ordered as a kit atthis time. Will be available ascartridge control options inthe future with customerspecified settings.Contact your SunDistributor when orderingas cartridge control option.ManualReleaseScrewLocknutBack-upRingSealPin (2) Cap Existing CartridgeOnly cartridges date stamped “62”or earlier.Installation Instructions:Kit consists of 2 Driv-Lok pins(811-001-011), Hex Cap(375-020). To prevent anydamage to nose end and/or anymoving parts, only install thiskit while cartridge is screwedinto a cavity.1. Set adjustment to desired levelwithin recommended range ofvalve and tighten jam nut to12Nm.2. Remove maximum settingstop ring from the adjustscrew.3. Thread hex cap onto the adjustscrew until it bottoms outagainst jam nut and tighten to12 Nm.4. Insert one of the Driv-Lok pinsinto the hex cap holes and tapinto place using a hammeruntil flush. Repeat procedurewith second Driv-Lok pin.5. Install is now completed.Lockwire Kit991-012All M, Q and R controls(except solenoid operatedcartridges).Locking WireLead SealPosition SwitchProtective Cover(6061-T6 Aluminium)991-043LOHC-Z**53,1 mm38,9 mm53,1 mm38,9 mm(4) 1/4-20 SCHS x 101,6 mm LG95,3 mmInstallation:Threaded holes will need to bemachined in the manifold to installcover.Number of Holes: 4Mounting Hole Thread:.250-20 UNC -2BMounting Hole Depth: 13,5 mmVisit www.sunhydraulics.com for current list pricing and complete technical information on all Sun products.182 Int’l Shortcut Catalogue #999-901-312