1134 & 1135 Web User Guide rev2.0 - OneAccess extranet

TELINDUS 1134/1135 Web Interface User’s Guide4.6 ADVANCED (for advanced users only)The ADSL Router supports a host of advanced features. For basic ADSL Router functionality,the user does not need to utilize these advanced features. The features help with routing,security, port configuration, management and Plug and Play capability.4.6.1 UPnPUPnP NAT and Firewall Traversal allow traffic to pass-through the ADSL Router for applicationsusing the UPnP protocol. This feature requires one active DSL connection. In presence ofmultiple DSL connections, select the one over which the incoming traffic will be present, forexample the default Internet connection.To enable UPnP, you must first have a WAN connection configured. Once a WAN connection isconfigured, click ADVANCED and select UPnP. This will bring up the screen shown in Figure 15.You must enable UPnP and then select which connection will utilize UPnP.Figure 15 (UPnP)The Apply button will temporarily save these settings. To make the change permanent, you needto click on Save All Settings. At the System Commands page under the TOOLS, click on SaveAll.Version 1.0 Page 26/54 October 2004