QSDT4PCRC and QSDT8PCRS_web.pdf - Q-See

VIDEO CAPTURE CARDHARDWARE AND CONNECTIONS3.1 QSDT4PCRC CARD HARDWARECHAPTER 3SPOT OUTThe Spot Out feature allows you to send selected video channels to a separate monitor.Menus and controls will not display in this monitor. If you do not wish to use this feature thenyou do not have to attach this port.Alarm PortSpot Out PortAudio In PortsPICTURE 3-1Spot Out with Multiple CardsIn situations where multiple cards areinstalled, only one card can provide the signalto the remote monitor.Link the con2 to con1 ports on the cards,with the last card linking to the Spot Out porton the face plate.PICTURE 3-3AUDIOYou will only need to install the Audio dongle if you have audio-equipped cameras,microphones or other audio input devices.Use of this dongle will take up an additionalI/O port on the computer.The audio connector’s pins are mapped outin Picture 3-4.PIN1 AUDIO-1 PIN2 GNDPIN3 AUDIO-2 PIN4 GNDPIN5 AUDIO-3 PIN6 GNDPIN7 AUDIO-4 PIN8 GNDJ5GiL-G-8P-S3T2-E12345678CallMonitorOutCHAPTER 3 VIDEO CAPTURE CARD HARDWARE AND CONNECTIONSPICTURE 3-4Video In DongleVIDEOThe video dongle connects to the 15-pinreceiver on the card. The four video inputsuse BNC connectors to interface with thecamera leads.VideoVideoVideoVideoNot UsedNot UsedNot UsedNot Used123456789101112131415GroundPICTURE 3-2PICTURE 3-512 13