QSDT4PCRC and QSDT8PCRS_web.pdf - Q-See

7.1 BASIC CONFIGURATIONYour card is pre-configured with default settings which meet the needs of most users,however it is designed to allow you maximum flexibility in configuring the system to meet yourspecific needs.In the upper portion of the Basic Configuration window are settings which control additionalaspects of your cameras. We have already covered the recording-specific settings in theprevious chapter.CAMERA DISPLAY SETTINGSDwell IntervalIf you have enabled Auto Dwell function on the main interface page, then you can set thedwell time, in seconds, of a screen here.CaptionThere are four options, None, ID, Name,and ID/Name for users to select for all thechannels.‘None’ means no title or name;‘ID’ means camera numbers, i.e. 1, 2, 3and so on;‘Name’ means camera names, i.e.Cam1, Cam2 and so on;‘ID/Name’ means both camera numberand camera name, i.e. 1/Cam1, 2/Cam2 and so on.PICTURE 7-2ResolutionYou may have resolution options of 320×240, 640x480, or 704x480 (NTSC) for users to selectfor all the channels depending on the card you are using.Call MonitorYou can connect another monitor to the Spot Out port on the card and select the displaymodes here.SYSTEM LOG IN AND REBOOTYou can enter your User Name and Password that you use to log into Windows so that theSuperDVR can log in upon startup or reboot.Since the windows system may becomeunstable after a couple of days of continuousoperating, it may cause SuperDVR tobecome unstable. You can use the softwaresupport auto-reboot option to help avoid this.PICTURE 7-3Select the PC Auto Reboot tab in the centerof the Basic Configuration screen and thencheck the box next to PC Auto Reboot andset the interval by day, which will cause thesystem to reboot automatically according toyour schedule.VIDEO CONFIGURATIONClicking on the video configuration icon will open a new page which will allow you tochange the contrast, brightness, hue, saturation and auto gain of individual cameras, bymoving the levers on the bars. Clicking Default will restore the default values.The range of values is from 0 to 255.Contrast - Set image color contrast.Brightness - Set image brightness.Hue - Set image hue.Saturation - Set image SaturationPICTURE 7-4CHAPTER 7 SYSTEM SETTINGS38 39