QSDT4PCRC and QSDT8PCRS_web.pdf - Q-See

CAMERA SETUPClick the camera icon and the Camera Setup configuration will appearALARM CONFIGURATIONClick the alarm icon to open the Alarm Configuration windowTitle - Channel name. Users can set thechannel name from Cam1, Cam2, Cam3and Cam4.Camera security - Users are divided intotwo standards: normal user and superadmin. By selecting this option, onlyadministrator can see correspondingPICTURE 9-53channels.Time stamp - If selecting the check box, record time will be displayed on the screen whenplaying back the record.Net quality - There are five options to choose from: lowest, lower, medium, higher andhighest. The higher the picture quality is, the clearer the picture is, but the more bandwidthit takes to transmit the files.Audio in - If users select the check box, Webcam will record audio along with the video.Otherwise, it will not record audio.You can set the alarm type: Motion and other.There are two alarm out options to choosefrom: Buzzer and Auto mail.Buzzer - Enable buzzer on board for alarmAuto mail - When alarm is triggered, thePICTURE 9-55system will send an e-mail to usersautomatically.By clicking Copy To you can copy the setting of this channel to any other selected channel.RECORD CONFIGURATIONClick the Record icon to open the Record Configuration interface.NOTE! The default setting is that Audio input1 matches channel1 andAudio input2 matches channel2By clicking Copy To you can copy the setting of this channel to any other selected channel.SCHEDULE CONFIGURATIONClick the Calendar icon to enter the Schedule Configuration page.PICTURE 9-56There are three kinds of recording modes:manual record, schedule record, motiondetection/Sensor alarm record. Users can setschedules from Sunday to Monday separatelyfor all of the three recording modes. Sensoralarm recording mode has the highest priorityof the options.When users need to edit the schedule for achannel, select the camera name in the leftCamera group first.PICTURE 9-54Click icon and brush on the weekday schedule to add time; click icon and click on theweekday schedule to delete time.By clicking Copy To you can copy the setting of this channel to any other selected channel.Record setupThere are three kinds of recording modes:Manual record, Schedule record and MotionrecordYou can use multiple cameras to record.Every camera works separately and recordedfiles are also saved separately.PICTURE 9-57Record quality - There are five quality options to select from: lowest, lower, medium, higherand highest. The higher the record quality is, the clearer the recorded image is and themore hard space the recording takes up.Manual record - By selecting this option, the selected camera image will be recorded andsaved all the time.Schedule record - By selecting this option, the selected camera image will be recordedaccording to the times you setup on the schedule.Motion record - By selecting this option, users can set selected channels to record whenthere is motion detected in front of the camera.CHAPTER 9 REMOTE SURVEILLANCE & PLAYBACK74 75