QSDT4PCRC and QSDT8PCRS_web.pdf - Q-See

PART 2: DETERMINE THE NUMBER OF ROUTERS ON THE NETWORKTo find out the number of routers on your network, you will need to download a FREE routerdetection program.STEP 6. If there is only one router detected, then you may skip to Part 3: Simple PortForwarding.STEP 1. Go tohttp://www.pcwintech.com/shanes-toolboxSTEP 2. Click on Detect MultipleRouters to begin the download.If Multiple Routers are DetectedIf there are multiple routers, you will see adisplay similar to Picture 9-8.If so, it may be preferable to connect yourDVR and computer to the router thatconnects directly to the Internet. However, thisis not always possible depending upon yourparticular situation.STEP 3. Unzip the application to install it.STEP 4. Click on the detect_routersapplication to run it.PICTURE 9-5PICTURE 9-8In this case, you will need to proceed with the next section using the IP address for Router 1to forward its ports. After that, you will need to proceed to Part 4.PICTURE 9-6STEP 5. Click on CHECK NOW todetect how many Routers are in thenetwork.CHAPTER 9 REMOTE SURVEILLANCE & PLAYBACKPICTURE 9-752 53