VL1100 ERS Luminaires User's Guide - Vari-Lite

More documents

Recommendations

Info

VARI❋LITE® - VL1100 ERS LUMINAIRE USER’S MANUALDimmer Model OverviewAn electronic IGBT on-board dimmer is included with VL1100 incandescent dimmer models. Thedimmer heatsink is visible on the power-side yoke leg as shown in the following illustration.On-Board Electronic IGBT DimmerInternal lamp power dimmer, configuredfor either 115V or 230V operation dependingon model.Figure 1-1: VL1100 Tungsten Luminaire with On-Board IGBT Dimmer10 04 November 2009 02.9664.0001 0
DESCRIPTION : COMPONENTS1Arc Model OverviewAn external ballast unit is included with VL1100 arc models. In this case, the lamp power input cableis already connectorized for use with this unit.The following illustration shows the external arc ballast components.Arc Ballast Bolt1/2" x 13 x 1" Boltand 1/2" Split LockWasherLamp ConnectorCPC-type connector for connectingLamp Power Input cable from luminaire.Lamp Power Input CableSupplied cable and connector usedto connect luminaire to ballast unit.40 inches (1m)Ballast UnitProvides power forarc lamp source.VL1100 Arc LuminaireFigure 1-2: VL1100 Arc Luminaire with External BallastNote: The Lamp Power Input Cable has conductors for lamp power and ballast control. It is notcompatible with VARI❋LITE® Series 300 lamp runs.02.9664.0001 0 04 November 2009 11
Page 2 and 3: VARI❋LITE® is a trademark owned
Page 4 and 5: VARI❋LITE® - VL1100 ERS LUMINAIR
Page 78 and 79:
VARI❋LITE® - VL1100 ERS LUMINAIR
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96:
show all

VL1100 ERS Luminaires User's Guide - Vari-Lite

Create successful ePaper yourself

Delete template?

Save as template?