VL1100 ERS Luminaires User's Guide - Vari-Lite
VL1100 ERS Luminaires User's Guide - Vari-Lite
VL1100 ERS Luminaires User's Guide - Vari-Lite
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
VARI❋LITE® - <strong>VL1100</strong> <strong>ERS</strong> LUMINAIRE USER’S MANUALLamp Power Input Cable(not available in unitscontaining the on-boarddimmer)Figure 2-2: Lamp Power InputIncandescent Models (without On-Board Dimmer)Some incandescent versions of the <strong>VL1100</strong> <strong>ERS</strong> Luminaire will require an external dimmer unit forlamp power. A lamp power input cable is provided for connecting to these units. Install a connectormeeting your requirements using the following wire color code:Wire*Green/YellowBlueBrownConnectionAC GroundAC NeutralAC Line* International (Harmonized) StandardIncandescent Models (with On-Board IGBT Dimmer)Some incandescent models of the <strong>VL1100</strong> <strong>ERS</strong> luminaire contain an on-board IGBT dimmer. Thisdimmer is used to power the lamp without need for an external dimmer. In these models, the lamppower cable is not supplied and instead a blanking plug is installed at the power/data input panel (seeFigure 2-2).CAUTION: The on-board IGBT dimmer is voltage specific (not switchable). It is either 115V or230V, depending on model purchased. Before connecting power, determine the operational voltage forthe unit. If required, please contact <strong>Vari</strong>-<strong>Lite</strong> customer service or your Authorized VARI❋LITE®Dealer for assistance.Arc ModelsAn external arc ballast unit is included with the arc version of the <strong>VL1100</strong> <strong>ERS</strong> Luminaire. The lamppower input cable is already connectorized for use with this unit.16 04 November 2009 02.9664.0001 0
Change language