VL1100 ERS Luminaires User's Guide - Vari-Lite

More documents

Recommendations

Info

VARI❋LITE® - <strong>VL1100</strong> <strong>ERS</strong> LUMINAIRE USER’S MANUALShutter MechanismFor units with a shutter mechanism, the shutter is comprised of four frame blades that moveindependently or in unison. The entire assembly operates in a smooth, time-continuous motion usingstepper motors (two per frame blade and one to rotate the entire shutter mechanism). The shuttermechanism can rotate 45 o in either direction and the frame blades can tilt +/- 35 o .Table 3-9: Shutter Mechanism DMX Map Chart (shutter models only)Item % Value DMX Value ActionFrame 1A 0 0 Opento Frame 4B 100 255 ClosedShut Rot0 0 CCW(Shutter50 128 CenterRotation)100 255 CW44 04 November 2009 02.9664.0001 0
OPERATION : LUMINAIRE TIMING3Luminaire TimingTiming Channel InformationTiming channel control improves the timed moves of certain groups of parameters. We provide threetiming channels, one for Focus (Pan and Tilt), one for color parameters and one for beam parameters.Timing channels support time values of up to six minutes.Table 3-10: Channel Function / Timing Channel RelationshipChannel FunctionPan (Hi Byte/Lo Byte)Tilt (Hi Byte/Lo Byte)BlueAmberMagentaColor WheelDiffusionBeamEdgeZoomRotating GoboGobo Index (HiByte/LoByte)Shutter (all 9 motors)Timing ChannelFocus Time Color Time Beam TimeA timing value of zero is full speed. A time value of 100% (or 255 in DMX) causes the associatedparameter(s) to follow cue fade time (console time) rather than the timing channel.Note: The particular storing syntax for your console, as well as instructions on how to write part cues,can be found in the operation manual for that console.To use these channels, you must:Step 1. Create the cue, including color, gobo, edge and diffusion as required.Step 2. Decide which fixtures and which parameter groups will use timing channels.Step 3. Assign a value to the particular timing channel(s) you wish to use (for timing informationsee chart on next page).Step 4. Set console timing (or cue fade time) for parameters and timing channels to zero seconds.Step 5. Store cue.02.9664.0001 0 04 November 2009 45
Page 2 and 3:
VARI❋LITE® is a trademark owned
Page 4 and 5:
VARI❋LITE® - VL1100 ERS LUMINAIR
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13: VARI❋LITE® - VL1100 ERS LUMINAIR
Page 96: VARI❋LITE® - VL1100 ERS LUMINAIR
show all

VL1100 ERS Luminaires User's Guide - Vari-Lite

Create successful ePaper yourself

Delete template?

Save as template?