VL1100 ERS Luminaires User's Guide - Vari-Lite
VL1100 ERS Luminaires User's Guide - Vari-Lite
VL1100 ERS Luminaires User's Guide - Vari-Lite
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INSTALLATION : INSTALLATION PROCEDURES2Installing Lamp (Arc Models)In the event the lamp was packed separately during shipment, it will be necessary to install before use.WARNING: Ensure that power is removed from luminaire when installing lamp.CAUTION: Wear cotton gloves or other covering while installing lamp. Touching lamp glass withbare fingers will leave oil and may cause the lamp to explode or reduce lamp life. If touched, usealcohol and cotton cloth to thoroughly clean glass portion of lamp.To install arc lamp:Step 1. Ensure power is removed from luminaire.Step 2. At backcap, gradually loosen two 10-32x2-3/8" PPSS black screws (Figure 2-6) a few turnsat a time until backcap is free. (Screws must be alternately loosened to prevent one side fromlocking up.)BackcapInterior ViewRear HeadAssemblyCAUTION:Do not touch lampwith bare fingers.BackcapAlign whenre-installingAlignment Stud (2)CAUTION:Alignment Hole (2)Holes and studs MUST bealigned when re-installing.10-32x2-3/8 PPSSBlack Screws (captive)- loosen each graduallyFigure 2-6: Removing Arc Backcap02.9664.0001 0 04 November 2009 23