VL1100 ERS Luminaires User's Guide - Vari-Lite

More documents

Recommendations

Info

VARI❋LITE® - VL1100 ERS LUMINAIRE USER’S MANUALStep3. Grip lamp by base and firmly install in socket.CAUTION:Do not touch lampwith bare fingers.SocketLampInstall lamp, firmly pressing into place.Figure 2-7: Installing Arc Lamp in SocketStep 4. Re-install backcap, ensuring that alignment studs and holes are aligned (Figure 2-6).Step 5. Align lamp. (Refer to “Align Lamp For Maximum Beam Irradiance” on page 34.)24 04 November 2009 02.9664.0001 0
INSTALLATION : INSTALLATION PROCEDURES2Accessory Frame HolderAn accessory frame holder is provided for the addition of a top hat or gel frame with silks, frosts orcolor correction if required. The frame holder is designed to fit a standard 8-inch gel frame or top hat.To remove and replace frame or top hat:Step 1. Disconnect luminaire AC input cable from power source.Step 2. At front lens, press upward on accessory frame latch and turn to open.Step 3. Remove frame/top hat, if any (Figure 2-8).Step 4. Install frame/top hat and close latch.Press Upand TurnLatchGel, Silk, orFrostHead AssemblyAccessory FrameNOTE:The accessory frame is not a Vari-Lite accessory.Figure 2-8: Installing a Frame or Top Hat02.9664.0001 0 04 November 2009 25
Page 2 and 3: VARI❋LITE® is a trademark owned
Page 4 and 5: VARI❋LITE® - VL1100 ERS LUMINAIR
Page 92 and 93:
VARI❋LITE® - VL1100 ERS LUMINAIR
Page 94 and 95:
Page 96:
show all

VL1100 ERS Luminaires User's Guide - Vari-Lite

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?