2 - Asante

Configuring Asanté BridgesRefreshRefreshes the current table contents.DeleteDeletes a selected table entry.∆QuitCloses the window.Be aware that if you delete an entry in the table usingAsantéView, the entry is erased from the table butremains visible in part, though disabled at the localmanagement level. Here, the entry is OFF, the sourceand destination address ranges are 0, but the packettype range is not affected.Adding and Modifying a Range Table Entry123Select the bridge to be managed by double-clicking its iconon the map.Open the Configuration menu.Select Filter Table, then click Range.The Bridge Range Forwarding Table appears.❏❏Click Add to add a new entry orSelect an entry in the table and click Modify.The Add Range Table Entry window, as shown inFigure 5-10, appears.Figure 5-10The Add Range Table Entry windowPage 5-22