2 - Asante

Using the Panel ViewThe AsantéNetRASDouble-click any NetRAS Remote Access Server icon on the map toopen its panel view. Figure 3-10 shows an example of the NetRAS panelview.Device label3-in-1 PortSelectorMenu barRemote user I/O PortsFigure 3-10NetRAS Panel ViewThe following paragraphs describe the NetRAS panel components.3-in-1 Port SelectorDisplays a graphic switch used for selecting the 3-in-1 port for statisticalperformance monitoring with AsantéView.You must click in this area to tell AsantéView that these are the portsyou want to monitor. After selecting the ports, you can then select astatistical monitoring tool from the Performance menu.To deselect the ports, click anywhere else on the panel view.Device LabelDisplays the label assigned to this device in the map.Edit it in the Modify Information window.Menu BarProvides access to AsantéView commands and functions. See"NetRAS Menu Bar" on page 3-20 for information about each menuitem.Remote User I/O PortsDisplay how many RJ45 I/O ports are currently installed in theNetRAS (maximum of 16).Click any one of the ports to select it for statistical performancemonitoring, or for port status.To deselect a port, click anywhere else on the panel view.NetRAS Menu BarClicking the menu items in the NetRAS Menu Bar gives you access to theAsantéView functions listed in the following paragraphs:Except for the Agent Identification Configuration window, all windowsmentioned in this section are accessible only from the NetRASMenu Bar.Page 3-20