2 - Asante

Other Monitoring ToolsNode Summary column descriptionsGr-PrtLists the active front panel ports.The Uplink and SNMP ports appear as 1-1 and 1-2, respectively, forthe AsantéHub 1012 and the AsantéBridge 1012.The SNMP port is number 16 for the AsantéHub 2072 and theNetStacker hub.SourceDisplays the physical address of the source deviceDestinationDisplays the physical address of the destination devicePkt type/LenDisplays the frame type, data length of the packets being monitored,and idle time (that is, the time since the last packet was received).∆ Idle time is not supported in the AsantéBridge 1012.❏❏❏Idle time is supported in the following image codeversions:AsantéHub 1012, version 2.4 and above (In-Bandonly)AsantéHub 2072, version 1.3 and aboveNetStacker hub, version 1.0 and aboveEach time a new device uses a port, or the frame typechanges, the hub stores an entry in the Node Summarylog.You can specify the amount of time this information isstored in the hub with the Node Aging option in theNode Summary window.∆The Source and Destination columns display the aliascorresponding to the physical address. You can modifythe alias in the Edit Node Database window (see“Edit Node Database” on page 7-29 for moreinformation).Page 8-19