2 - Asante

Using the Panel ViewIf a link is attached to a port, its corresponding link LED is lightedand gr een. If the port is partitioned manually, its partition LED isalways lighted and yellow. If it is partitioned by auto-partition, itblinks.Panel View SelectorChanges from the front panel view to the rear panel view.Figure 3-2 shows an AsantéHub 1012 rear panel view.Hub map labelAMS link portRJ21connectorHub 3-in-1port selectorRS232connectorPanel view selector; changesimage to front view of the hubFigure 3-2AsantéHub 1012 Rear Panel ViewThe following paragraphs describe the elements of theAsantéHub 1012 rear panel view.AMS Link PortDisplays a passive image of the port.Hub 3-in-1 Port SelectorDisplays a graphic image of the 3-in-1 port (10BaseT, BNC and AUI).To monitor or control this port, click any connector and use theAsantéView main menu bar to open the All Port Monitor or PortControl windows. This port is sometimes referred to as the uplinkport.Panel View SelectorChanges from the rear panel view to the front panel view.Page 3-4