2 - Asante

Installing AsantéView SoftwareLogging intoAsantéViewYour hub(s) and the AsantéView Management Station computer shouldbe connected to the network backbone (or, at minimum, yourAsantéView Management Station should have an in-band connection tothe Asanté hubs you wish to manage).Refer to the appropriate Installation Guide for instructions on connectingyour Asanté device.The following instructions explain how to log into AsantéView 2.6.123456Start Windows.Open the Start menu and select Programs.If using Windows 3.11 or Windows NT 3.51, double-clickthe AsantéView program group window.Select the AsantéView directory (AmsView) and selectAmsView.If using Windows 3.11 or Windows NT 3.51, double-clickthe AsantéView icon.The Log-In window appears.Type the default user name in the User Name field, as follows:supervisorType the default password in the Password field, as follows:super▲ Both the user name and password fields are case-sensitive.Enter them exactly as shown.Click the OK button to continue.To exit the Log-In window, click Cancel.∆If the message “Ping is not supported by your networkprotocol stack.” appears, as shown inFigure 1-4, click yes.Page 1-6