2 - Asante

Configuring the NetRAS Remote Access ServerInitializing theNetRASUsing the procedure that follows, you can use AsantéView to initialize anew NetRAS Remote Access Server.The procedure has two parts:❏❏Sending the NetRAS IP information to the bootpserver.Adding the NetRAS to your map.123Start AsantéView 2.6 and log in as supervisor.Open the Application menu.Select Bootp.The BootP and TFTP window opens (it should be emptyat this point). Figure 6-1 shows an example.Figure 6-1Bootp window before NetRAS initialization45Connect the NetRAS to the network.Power on the NetRAS.AsantéView 2.6 displays a NetRAS Bootp request window.An example of this window is shown in Figure 6-2.Figure 6-2NetRAS Initialization Bootp Request dialog boxPage 6-2