2 - Asante

Configuring Asanté HubsControl ButtonPort disableUTP/BNC/AUI/AUTO(not used with theAsantéHub 2072 orNetStacker hub)RefreshApplyQuitStatusMeaning/FunctionOUT = Port not partitioned (default)IN = Port partitionedPartitions (stops transmission on) the specified port. This isdone manually by the operator while auto-partitioning isdone automatically by the hub in certain circumstances.Use this command to isolate network devices possiblycausing problems on the network, or to preventunauthorized use of a port or station.Sets primary/redundant link options for this hub’s uplink.Select UTP, BNC or AUI to establish the connection as theprimary uplink. Select AUTO to use the default sequencefor selection: AUI, UTP, BNC.Updates the information displayed in the window.Sends current window settings to the hub.Closes window without transmitting changes to the device.The command status line at the bottom of the windowdisplays window status; for example, Command isexecuting.Table 4-5RefreshApplyBank SelectQuitStatusPort Control Window MenuUpdates the information displayed in the window.Sends current window settings to the hub.Selects ports 1-8 or 9-16; this menu item is active only withthe AsantéHub 1016-IQ.Closes window without transmitting changes to the device.The command status line at the bottom of the windowdisplays window status; for example, Command isexecuting.Page 4-14