2 - Asante

Building a Map▲ To search by All IP devices, your TCP/IP stack mustsupport Ping/ICMP. Currently, Windows NT 4.0 doessupport Ping/ICMp; Windows 95 and Windows NT3.51 does not.If you have Asanté and other SNMP devices on your network,select All SNMP devices.The Read community and Max devices fields canremain with their default values.56789Click OK to start the search.AsantéView automatically searches the network and placesthe discovered devices on the map.❏❏❏A hub turns green if its link is validated.A hub turns red if its link is down or if the hubcannot be reached.A hub turns yellow when an event report islogged.Repeat Steps 1–5 for each subnet.For example, run one Discover SubGroup operation with abeginning IP address of 192.204.55.1 and a last IP addressof 192.204.55.254; then run Discover SubGroup againwith a beginning IP address of 192.204.56.1 and lastIP address of 192.204.56.254, and so on.If you want to have separate maps for each subnet, see“Building a Map” on page 2-16.After you have completed all auto-discovery operations,save the map by choosing Save Map from the File menu.If you want to log out, click Exit from the File menu.Click Yes to confirm.For more information on creating maps, refer to “Building a Map” onpage 2-16.Page 2-17