Brocade Netiron CES and Brocade Netiron CER Devices Hardware ...
Brocade Netiron CES and Brocade Netiron CER Devices Hardware ...
Brocade Netiron CES and Brocade Netiron CER Devices Hardware ...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Power supply replacement 5<br />
This comm<strong>and</strong> displays status information for the power supplies <strong>and</strong> the fans. The power supplies<br />
are numbered from left to right. These numbers assume you are facing the front of the device, not<br />
the rear.<br />
If the display indicates “Installed (Failed)” for any of the slots, the power supply installed in that<br />
particular slot has failed.<br />
AC power supply<br />
FIGURE 31 AC power supply<br />
Power supplies for the <strong>Brocade</strong> devices<br />
The divice ship with one alternating-current (AC) power supply or direct-current (DC) power supply.<br />
All models have two power supply slots, enabling you to install a second power supply for<br />
redundancy. If desired, you can install a second supply for redundancy.<br />
If you need to install a redundant power supply, it may be easier to install it before mounting the<br />
device, although the power supplies are “hot swappable” <strong>and</strong> can be installed or removed after the<br />
device is mounted <strong>and</strong> powered on.<br />
CAUTION<br />
Changes or modifications made to this device that are not expressly approved by the party<br />
responsible for compliance could void the user's authority to operate the equipment.<br />
Removing the AC power supply<br />
Required tools<br />
You will need the following tool to perform this procedure:<br />
• #2 Phillips-head screwdriver<br />
<strong>Brocade</strong> NetIron <strong>CES</strong> <strong>and</strong> <strong>Brocade</strong> NetIron <strong>CER</strong> <strong>Devices</strong> <strong>Hardware</strong> Guide 57<br />
53-1002425-03
Change language