You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Chapter</strong> 2: Installation 19<br />
4. Attach the keyboard, monitor and mouse connectors of the DSRIQ module<br />
to a user port on your legacy KVM switch.<br />
5. Connect the servers to your legacy KVM switch according to the<br />
instructions included with the device.<br />
6. Power cycle the legacy KVM switch to enable the cascade code.<br />
7. Repeat steps 2-6 for all legacy KVM switches you want to attach to your<br />
system as cascading switches.<br />
To connect and power up your DSR:<br />
1. Connect your network cable from the LAN port on the rear of the DSR to<br />
your network.<br />
2. Power up all attached systems.<br />
To install your DSR software:<br />
See the DSView Installer/User Guide that ships with your software.<br />
NOTE: Your software registration key will be necessary for installing the DSAuth software used<br />
with your DSR appliance. Internet Explorer 5.0 or higher and Java Runtime Environment JRE<br />
1.4.[X] must also be installed to use the DSWebview components of the DSView software.
Change language