Chapter 1

More documents

Recommendations

Info

64 DSR Installer/User Guide 5. Repeat steps 3 and 4 to confi gure additional macros. 6. When fi nished, press Enter to return to the previous screen. Using History mode History mode allows you to examine the contents of the history buffer, which contains the events that have occurred. The DSRIQ-SRL maintains a buffer containing 240 lines minimum, or 10 screens, of output. When the history buffer is full, it will add new lines at the bottom of the buffer and delete the oldest lines at the top of the buffer. NOTE: The Confi g Key Sequence, On-Line Key Sequence and Clear History Key Sequence used in the following procedure are the default values. These key combinations can be changed using the Confi guration Screen. To use History mode: 1. Press Ctrl-F9. The mode will display as History. 2. Press one of the following key combinations to perform the indicated action: • Home - Move to the top of the buffer. • End - Move to the bottom of the buffer. • Page Up - Move up one buffer page. • Page Down - Move down one buffer page. • Up Arrow - Move up one buffer line. • Down Arrow - Move down one buffer line. • Ctrl-F8 - Enters Confi guration mode. The Confi guration Screen will appear. Press Ctrl-F9 to return to the previous screen with History mode enabled, or Ctrl-F10 to return to the previous screen with On- Line mode enabled. • Ctrl-F11 - Clears the history buffer. If you choose this option, a warning screen will appear. Press Enter to delete the history buffer, or Esc to cancel the action. The previous screen will reappear. 3. When fi nished, press Ctrl-F10 to exit History mode and return to On-Line mode.
DSRIQ-SRL pinouts Appendices 65 The following table lists the pinouts for the DSRIQ-SRL module and is provided for your reference. DSRIQ-SRL Pinouts DB9-F Host Signal Signal Flow SRLSignal Pin Name/Description Name/Description 1 DCD - Data Carrier Detect Out of SRL DTR - Data Terminal Ready 2 RXD - Receive Data Out of SRL TXD - Transmit Data 3 TXD - Transmit Data In to SRL RXD - Receive Data 4 DTR - Data Terminal Ready In to SRL DSR - Data Set Ready 5 GND - Signal Ground N/A GND - Signal Ground 6 DSR - Data Set Ready Out of SRL DTR - Data Terminal Ready 7 RTS - Request to Send In to SRL CTS - Clear to Send 8 CTS- Clear to Send Out of SRL RTS - Request to Send 9 N/C - Not Connected N/A N/C - Not Connected
Page 1 and 2:
DSR Installer/User Guide For model
Page 3 and 4:
DSR Installer/User Guide Avocent,
Page 5:
Table of Contents Chapter 1: Produc
Page 9 and 10:
Chapter 1: Product Overview Feature
Page 11 and 12:
DSR2010 Analog User (OSCAR) Figure
Page 13 and 14:
Chapter 1: Product Overview 7 Rack
Page 15:
2 Installation Contents Getting Sta
Page 18 and 19:
12 DSR Installer/User Guide Verific
Page 20 and 21: 14 DSR Installer/User Guide Power C
Page 22 and 23: 16 DSR Installer/User Guide 3. Sele
Page 24 and 25: 18 DSR Installer/User Guide Adding
Page 26 and 27: 20 DSR Installer/User Guide
Page 29 and 30: Chapter 3: Local Port Operation Cha
Page 31 and 32: To disconnect from a server or seri
Page 33 and 34: Configuring OSCAR Chapter 3: Local
Page 35 and 36: Figure 3.4: Name Modify Dialog Box
Page 37 and 38: Figure 3.6: Device Modify Dialog Bo
Page 39 and 40: Controlling the Status Flag Chapter
Page 41 and 42: Figure 3.10: Broadcast Dialog Box C
Page 43 and 44: Chapter 3: Local Port Operation 37
Page 51 and 52: Figure 3.17: Disconnect Dialog Box
Page 53 and 54: Figure 3.19: Digital Version Dialog
Page 55: 4 Terminal Operations Contents Acce
Page 58 and 59: 52 DSR Installer/User Guide When a
Page 60 and 61: 54 DSR Installer/User Guide Enable
Page 63 and 64: Appendices Appendix A: FLASH Upgrad
Page 65 and 66: Figure A.2: DSRIQ Selection Dialog
Page 67 and 68: Appendix B: Using DSRIQ-SRL Modules
Page 69: Appendices 63 • History Key Seque
Page 73 and 74: DSR Wiring Standards (continued) Pi
Page 75 and 76: Appendices 69 DSR Product Specifi c
Page 77 and 78: Appendices 71 For example: For Stop
Page 79 and 80: LIMITED WARRANTY Avocent Corporatio
show all

Chapter 1

Create successful ePaper yourself

Delete template?

Save as template?