MC-Balance User Manual 4.0.UK.00

All Movacolor dosing units are standard equipped with the stepper motor 2A (LT), in case of usingthe feed screw A30 the stepper motor 4,5A (HT) will be supplied. Also a screw A20 can beconnected to the HT motor.Stepper motor 2A(LT)Stepper motor 4,5A(HT)i Do not select the HT motor if LT motor is connected. This will damage the motor.If LT motor is selected and HT motor is connected there will be less motor torque and this caninfluence the dosing.The controller of the dosing unit makes a distinction between two groups of materials, normalgranules and micro granules. To determine the kind of material in your application use thedescription below.Material typesNormal Granules:(NG)øØ < 4 mm L < 4 mm *LMicro / Mini Granules:(MG)øThe term Micro/Mini Granules alsoincludes free flowing powder.Ø < ø2,5 mm L < 3 mm *L* For other sizes contact Movacolor.The actual capacity of the dosing system depends on:• The volume weight of the material (bulk density)• The specific weight of the material (specific density)• The granular shape of the material• The granule size• The surface structure of the materialGranular material can be normal or micro. The granular material and powder material has to befree flowing, non-static and not sticky.7MC-Balance manual