MC-Balance User Manual 4.0.UK.00

Configuration: Start userUser level to start up with, when switching on the controller’s mains power.Operator, Tooling or Supervisor.Configuration: Tooling passw.Password for Tooling user level, 4 numerals, default 1111Configuration: Supervisor passw.Password for Supervisor user level 4 numerals default 2222Configuration: ConversionSelection of Units: Metric = European [gr/s]Imperial = US [lbs/hr]Kg/h = In extrusion mode the capacity will be shown in kg/h instead of gr/sConfiguration: Full scaleSelected loadcell will be shown (read only)Configuration: Modbus unitIf the controller is used in a Modbus network, the unique identity can be filled in here (1-231)Configuration: DateActual date (dd / mm / yy)Configuration: TimeActual time (hh / mm / ss)iDate and Time will be stored for minimal 1500 hrs. with controller switched OFF.20MC-Balance manual