TRS Star CompactFlash Card Industrial-Grade Datasheet

Industrial-Grade CompactFlash CardTRS Star SpecificationFor more information visit us under:http://www.trs-star.com2. Product SpecificationsFor all the following specifications, values are defined at ambient temperature and nominal supplyvoltage unless otherwise stated.2.1 System Enviromental SpecificationsTable 2.1 Enviromental SpecificationsStandard Temp. RangeExtended Temp. RangTemperatureOperatingNon-Operating0°C to +65°C-20°C to +85°C-40°C to +80°C-50°C to +100°CHumidty Operating & Non-Operating 5% to 95%, non-condensing 5% to 95%, non-condensingAcoustic Noise Operating & Non-Operating 0dB 0dBVibrationOperating & Non-Operating30 G peak-to-peakmaximum30 G peak-to-peakmaximumShock Operating & Non-Operating 3 000 G maximum 3 000 G maximumAltitude(relative to sea level)Operating & Non-Operating 80 000 feet maximum 80 000 feet maximum2.2 System Power RequirementsTable 2.2 Power RequirementsStandard Temp. RangeExtended Temp. RangDC Input Voltage (VCC)100 mV max. ripple (p-p)3.3V ±10% 5V ± 10% 3.3V ±10% 5V ±10%up to 512MB Sleep 120 µA 250 µA 120 µA 250 µAover 512 MB Sleep 240 µA 500 µA 240 µA 500 µAMaximum Average ValueSee Notes belowReading 30 mA RMS 38 mA RMS 30 mA RMS 38 mA RMSWriting 35 mA RMS 45 mA RMS 35 mA RMS 45 mA RMSRead/Write Peak 40 mA 50 mA 40 mA 50 mANOTES: All values quoted are typical at 25° C and nominal supply voltage.Sleep mode currently is specified under the condition that all card inputs are static CMOSlevels and in a “Not Busy” operating state.TRS* Tele-Radio-Space GmbH, reserves the right Page 12 from 113 Industrial-Grade CompactFlash Cardto change products or specifications without notice. Rev. 1.4 Stand 06/2006