TRS Star CompactFlash Card Industrial-Grade Datasheet

Industrial-Grade CompactFlash CardTRS Star SpecificationFor more information visit us under:http://www.trs-star.com3.3.11 I/O Write (Output) Timing Specification1. All timings are measured at the card.2. Skews and delays from the host system driver/receiver to the card must be accounted for by thesystem design.3. D[15::0] signifies data provided by the host system to the card.Table 3.3.11 I/O Write Timing SpecificationFigure 3.3.11 I/O Write Timing DiagramSpeed Version term Symbol IEEE SymbolMinnsMaxData Setup before -IOWR tsu(IOWR) tDVIWL 60Data Hold following -IOWR th(IOWR) tlWHDX 30-IOWR Width Time tw(IOWR) tlWLIWH 165Address Setup before -IOWR tsuA(IOWR) tAVIWL 70Address Hold following -IOWR thA(IOWR) tlWHAX 20-CE Setup before -IOWR tsuCE(IOWR) tELIWL 5-CE Hold following -IOWR thCE(IOWR) tlWHEH 20-REG Setup before -IOWR tsuREG(IOWR) tRGLIWL 5-REG Hold following -IOWR thREG(IOWR) tlWHRGH 0-IOIS16 Delay Falling from Address tdfIOIS16(ADR) tAVISL 35-IOIS16 Delay Rising from Address tdrIOIS16(ADR)tAVISH35The maximum load on -IOIS16 is 1 LSTTL with 50 pF total load.TRS* Tele-Radio-Space GmbH, reserves the right Page 29 from 113 Industrial-Grade CompactFlash Cardto change products or specifications without notice. Rev. 1.4 Stand 06/2006