TRS Star CompactFlash Card Industrial-Grade Datasheet

Industrial-Grade CompactFlash CardTRS Star SpecificationFor more information visit us under:http://www.trs-star.com3.3.1 Input Leakage ControlNOTE:In Table 3.3.1 “x” refers to the characteristics described in Section 3.3.2. For example, 1Uindicates a pull up resistor with a type 1 input characteristic.Table 3.3.1 Input Leakage ControlType Parameter Symbol Conditions Min Typ Max UnitsIxZ Input Leakage Current IL Vih = Vcc/Vil = Gnd -1 1 µAIxU IxU Pull Up Resistor RPU1 Vcc = 5.0V 50k 500k OhmIxD Pull Down Resistor RPD1 Vcc = 5.0V 50k 500k OhmNOTE: The minimum pullup resistor leakage current meets the PCMCIA specification of 10k ohmsbut is intentionally higher in the CompactFlash Memory Card Series product to reducepower use.3.3.2 Input CharacteristicsTable 3.3.2 Input CharacteristicsType Parameter Symbol12Input VoltageCMOSInput VoltageCMOSVihVilVihVilMin Typ Max Min Typ MaxVCC = 3.3V ±10% VCC = 5.0V ±10%1.82.60.60.81.52.40.60.8UnitsVoltsVolts3.3.3 Output Drive TypeIn Table 3.3.3, “x” refers to the characteristics described in Section 3.3.4. For example, OT3 refers toTotempole output with a type 3 output drive characteristic.Table 3.3.3. Output Drive TypeType Output Type Valid ConditionesOTx Totempole Ich and IolOZx Tri-State N-P Channel Ioh and IolOPx P-Channel Only Ioh OnlyONx N-Channel Only Iol OnlyTRS* Tele-Radio-Space GmbH, reserves the right Page 21 from 113 Industrial-Grade CompactFlash Cardto change products or specifications without notice. Rev. 1.4 Stand 06/2006