TRS Star CompactFlash Card Industrial-Grade Datasheet

Industrial-Grade CompactFlash CardTRS Star SpecificationFor more information visit us under:http://www.trs-star.com5.1.5.28 Word 68: Minimum PIO Transfer Cycle Time with Flow ControlThis field indicates in nanoseconds, the minimum cycle time the card supports while performing datatransfers using flow control.5.1.6 Idle – 97h, E3hThe Idle command in Table 5.1.6 causes the card to set BSY, enter the Idle (Read) mode, clear BSYand generate an interrupt. If the sector count is non-zero, it is interpreted as a timer count with eachcount being 5 milliseconds and the automatic power down mode is enabled. If the sector count is zero,the automatic power down mode is disabled. Note that this time base (5 msec) is different from theATA specification.Table 5.1.6 IdleCommand (7)Bit -> 7 6 5 4 3 2 1 0E3h or 97hC/D/H (6) X Drive XCyl High (5)Cyl Low (4)Sec Num (2)See Cnt (1)Feature (1)XXXTimer Count (5 msec increments)X5.1.7 Idle Immediate – 95h, E1hTable 5.1.7 Idle ImmediateBit -> 7 6 5 4 3 2 1 0Command (7)E1h or 95hC/D/H (6) X Drive XCyl High (5)Cyl Low (4)Sec Num (2)See Cnt (1)Feature (1)XXXXXTRS* Tele-Radio-Space GmbH, reserves the right Page 62 from 113 Industrial-Grade CompactFlash Cardto change products or specifications without notice. Rev. 1.4 Stand 06/2006