TRS Star CompactFlash Card Industrial-Grade Datasheet

Industrial-Grade CompactFlash CardTRS Star SpecificationFor more information visit us under:http://www.trs-star.com5.1.5.9 Word 20: Buffer TypeThis field defines the buffer capability with the 0002h meaning a dual ported multi-sector buffercapable of simultaneous data transfers to or from the host and the card.5.1.5.10 Word 21: Buffer SizeThis field defines the buffer capacity of 2 sectors or 1 kilobyte of SRAM.5.1.5.11 Word 22: ECC CountThis field defines the number of ECC bytes used on each sector in the Read and Write Longcommands.5.1.5.12 Word 23-26: Firmware RevisionThis field contains the revision of the firmware for this product.5.1.5.13 Word 27-46: Model NumberThis field contains the model number for this product and is left justified and padded with spaces(20h).5.1.5.14 Word 47: Read/Write Multiple Sector CountThis field contains the maximum number of sectors that can be read or written per interrupt using theRead Multiple or Write Multiple commands.5.1.5.15 Word 48: Double Word SupportThis field indicates this product will not support double word transfers.5.1.5.16 Word 49: CapabilitiesThis field indicates if this product supports DMA Data transfers and LBA mode. All TRS* Tele-Radio-Space GmbH products support LBA mode. Multiword DMA operation is supported by PCMCIAproducts in IDE mode. After CF Specification, Rev 2.1 releases, CompactFlash cards will be availablewith multiword DMA functionality.TRS* Tele-Radio-Space GmbH, reserves the right Page 59 from 113 Industrial-Grade CompactFlash Cardto change products or specifications without notice. Rev. 1.4 Stand 06/2006