TRS Star CompactFlash Card Industrial-Grade Datasheet

Industrial-Grade CompactFlash CardTRS Star SpecificationFor more information visit us under:http://www.trs-star.com5.1.17 Seek – 7XhThe Seek command in Table 5.1.17 is effectively a NOP command to the card although it doesperform a range check of cylinder and head or LBA address and returns an error if the address is outof range.Table 5.1.17 SeekCommand (7)Bit -> 7 6 5 4 3 2 1 0C/D/H (6) 1 LBA 1 Drive Head (LBA 27-24)Cyl High (5) Cylinder High (LBA 23-16)7XhCyl Low (4) Cylinder Low (LBA 15-8)Sec Num (2) X (LBA 7-0)See Cnt (1)Feature (1)XX5.1.18 Set Features – EFhThe Set Features command in Table 5.1.18-1 is used by the host to establish or select certainfeatures.Table 5.1.18-1 Seat FeaturesCommand (7)Bit -> 7 6 5 4 3 2 1 0C/D/H (6) X Drive XCyl High (5)Cyl Low (4)Sec Num (2)See Cnt (1)Feature (1)EFhXXXConfigFeatureTable 5.1.18-2 defines all features that are supported. Please note that the 9Ah feature is unique tothe CompactFlash Memory Card and are not part of the ATA Specification.TRS* Tele-Radio-Space GmbH, reserves the right Page 69 from 113 Industrial-Grade CompactFlash Cardto change products or specifications without notice. Rev. 1.4 Stand 06/2006